Reactive-Extruded PLA/PBAT/Bentonite Nanocomposites for Diffusion-Controlled Urea Release in Sustainable Fertilizer Systems

Approximately 70% of conventional fertilizers applied to soil are lost to the environment, mainly through leaching, especially in sandy and organic soils. This inefficiency increases environmental impact and reduces nutrient use efficiency. Controlled-release fertilizers (CRFs) have emerged as a viable strategy to regulate nutrient availability over time. In this context, biodegradable polymers are promising coating materials due to their ability to degrade gradually in soil. Blends based on poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) have been investigated; however, their thermodynamic immiscibility compromises interfacial adhesion and overall performance. To overcome this limitation, in situ reactive extrusion was employed using maleic anhydride as a grafting agent and dicumyl peroxide as an initiator, aiming to enhance phase compatibility. Additionally, the fully organomodified bentonite clay was incorporated as a functional filler and urea adsorbent. PLA/PBAT (70/30 wt %) system containing 2 phr maleic anhydride, 1 phr dicumyl peroxide, and 3 wt % bentonite was processed under different screw speeds and feed rates to determine the optimal conditions of processing. The composites were characterized in terms of thermal behavior, morphology, and water absorption. The optimal formulation, obtained at lower screw speed and higher feed rate, exhibited improved physicochemical properties. A CRF was produced by adding 10 wt % of urea to the optimized system. Leaching tests demonstrated gradual nutrient release, with a maximum released fraction 20.7% lower than that of the PLA/PBAT/urea system without bentonite clay, confirming the positive effect of bentonite on nutrient retention and controlled-release performance.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-19
DOI
https://doi.org/10.1021/acsomega.6c11349
Primary Topic
Polymer-Based Agricultural Enhancements
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Reactive-Extruded PLA/PBAT/Bentonite Nanocomposites for Diffusion-Controlled Urea Release in Sustainable Fertilizer Systems

Renan Henriques Gonçalves De Almeida, Ana Maria Furtado de Sousa, Murilo Barbosa Valério, Élen Beatriz Acordi Vasques Pacheco et al.
ACS Omega
Polymer-Based Agricultural Enhancements
article

Reactive-Extruded PLA/PBAT/Bentonite Nanocomposites for Diffusion-Controlled Urea Release in Sustainable Fertilizer Systems

Renan Henriques Gonçalves De Almeida, Ana Maria Furtado de Sousa, Murilo Barbosa Valério, Élen Beatriz Acordi Vasques Pacheco, Luíz Carlos Bertolino, Ana Lúcia Nazareth Silva, David Gonçalves Pena
article en

Abstract

Approximately 70% of conventional fertilizers applied to soil are lost to the environment, mainly through leaching, especially in sandy and organic soils. This inefficiency increases environmental impact and reduces nutrient use efficiency. Controlled-release fertilizers (CRFs) have emerged as a viable strategy to regulate nutrient availability over time. In this context, biodegradable polymers are promising coating materials due to their ability to degrade gradually in soil. Blends based on poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) have been investigated; however, their thermodynamic immiscibility compromises interfacial adhesion and overall performance. To overcome this limitation, in situ reactive extrusion was employed using maleic anhydride as a grafting agent and dicumyl peroxide as an initiator, aiming to enhance phase compatibility. Additionally, the fully organomodified bentonite clay was incorporated as a functional filler and urea adsorbent. PLA/PBAT (70/30 wt %) system containing 2 phr maleic anhydride, 1 phr dicumyl peroxide, and 3 wt % bentonite was processed under different screw speeds and feed rates to determine the optimal conditions of processing. The composites were characterized in terms of thermal behavior, morphology, and water absorption. The optimal formulation, obtained at lower screw speed and higher feed rate, exhibited improved physicochemical properties. A CRF was produced by adding 10 wt % of urea to the optimized system. Leaching tests demonstrated gradual nutrient release, with a maximum released fraction 20.7% lower than that of the PLA/PBAT/urea system without bentonite clay, confirming the positive effect of bentonite on nutrient retention and controlled-release performance.

ACS Omega
Universidade Federal do Rio de Janeiro (BR), Universidade do Estado do Rio de Janeiro (BR), Centro de Tecnologia Mineral (BR)
Polymer-Based Agricultural Enhancements
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon