Development of Nanofluids for Enhanced Water Disposal and Well Injectivity: From Experimental Assessment to Field Trial and Life Cycle Assessment

Produced water is often used for pressure maintenance and secondary recovery in reservoirs. However, the successful injection of produced water depends on its quality, which is related to the presence of organic and inorganic solids. In this study, four nanotechnology-based treatments were evaluated to restore and/or prevent formation damage associated with a decline in injectivity during the water-injection process. The evaluation was carried out from laboratory assessment to field trial application, including life cycle assessment (LCA). The experimental evaluation included water quality tests for remediation and damage inhibition scenarios, as well as zeta potential, interfacial tension, and organic dissolution testing. Water and solids were characterized using standard analytical methods and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). Additionally, reservoir simulation analyses were performed to identify pressure injection profiles under different remediation and inhibition scenarios (0%, 50%, and 100% effectiveness). The environmental impacts of each scenario were assessed by LCA. The experimental results indicated that nanofluids were effective in restoring injectivity by more than 80% with low dosages of nanotreatments ranging from 60 mg·L–1 to 200 mg·L–1. This improvement was mainly attributed to their ability to alter the surface charge of solids and dissolve organic compounds in solution. The first field trial showed a reduction in wellhead pressure after nanofluid injection, consistent with the reservoir simulation. The environmental impact evaluation based on LCA, which considered human resources, ecosystem quality, resource usage, and carbon footprint, showed the best environmental performance for the inclusion of nanotreatments in both remediation and inhibition phases, with a reduction in kgCO2eq emitted per water stored of up to 27% compared with the scenario without the inclusion of nanotreatments. The incorporation of nanotreatment for cake removal or cake formation inhibition can significantly alter the injection pressure profiles, thereby reducing energy demand and environmental impacts.

Authors

Institutions

Publication Details

Journal
Energy & Fuels
Published
2026-11-19
DOI
https://doi.org/10.1021/acs.energyfuels.6c03687
Primary Topic
Enhanced Oil Recovery Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Development of Nanofluids for Enhanced Water Disposal and Well Injectivity: From Experimental Assessment to Field Trial and Life Cycle Assessment

Lady J. Giraldo, Camilo A. Franco, Francisco Carrasco-Marı́n, Farid B. Cortés et al.
Energy & Fuels
Enhanced Oil Recovery Techniques
article

Development of Nanofluids for Enhanced Water Disposal and Well Injectivity: From Experimental Assessment to Field Trial and Life Cycle Assessment

Lady J. Giraldo, Camilo A. Franco, Francisco Carrasco-Marı́n, Farid B. Cortés, Natalia Cano, Carlos A. Franco, Frank E. Viveros
article en

Abstract

Produced water is often used for pressure maintenance and secondary recovery in reservoirs. However, the successful injection of produced water depends on its quality, which is related to the presence of organic and inorganic solids. In this study, four nanotechnology-based treatments were evaluated to restore and/or prevent formation damage associated with a decline in injectivity during the water-injection process. The evaluation was carried out from laboratory assessment to field trial application, including life cycle assessment (LCA). The experimental evaluation included water quality tests for remediation and damage inhibition scenarios, as well as zeta potential, interfacial tension, and organic dissolution testing. Water and solids were characterized using standard analytical methods and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). Additionally, reservoir simulation analyses were performed to identify pressure injection profiles under different remediation and inhibition scenarios (0%, 50%, and 100% effectiveness). The environmental impacts of each scenario were assessed by LCA. The experimental results indicated that nanofluids were effective in restoring injectivity by more than 80% with low dosages of nanotreatments ranging from 60 mg·L–1 to 200 mg·L–1. This improvement was mainly attributed to their ability to alter the surface charge of solids and dissolve organic compounds in solution. The first field trial showed a reduction in wellhead pressure after nanofluid injection, consistent with the reservoir simulation. The environmental impact evaluation based on LCA, which considered human resources, ecosystem quality, resource usage, and carbon footprint, showed the best environmental performance for the inclusion of nanotreatments in both remediation and inhibition phases, with a reduction in kgCO2eq emitted per water stored of up to 27% compared with the scenario without the inclusion of nanotreatments. The incorporation of nanotreatment for cake removal or cake formation inhibition can significantly alter the injection pressure profiles, thereby reducing energy demand and environmental impacts.

Energy & Fuels
Ecopetrol (Colombia) (CO), Universidad de Granada (ES), Universidad Nacional de Colombia (CO), University of Twente (NL)
Enhanced Oil Recovery Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon