Effect of morphology on the electrochemical properties of antimony/hard carbon composite anodes with barium titanate additives for sodium-ion batteries
The development of stable antimony-based anodes is critical for sodium-ion batteries due to the severe volume expansion and interfacial degradation of antimony during cycling. Herein, barium titanate-containing antimony/hard carbon composite anodes were prepared by ball milling and hand milling to clarify the role of additive content and morphology in determining electrochemical performance. X-ray diffraction confirmed the preservation of crystalline antimony and barium titanate phases, while scanning electron microscopy and energy-dispersive X-ray spectroscopy revealed more homogeneous particle distribution and barium/titanium dispersion in ball-milled electrodes. The ball-milled 10% barium titanate electrode exhibited lower charge-transfer resistance than the hand-milled counterpart and delivered approximately 290 mAh g −1 at the 100th cycle. These results indicate that controlled particle refinement and interfacial uniformity play a dominant role in improving antimony/hard carbon anode stability while the addition of 10–20% of barium titanate was shown to have a positive effect on electrochemical performance.
Authors
- Mehbare Doğrusöz (ORCID: https://orcid.org/0000-0002-3064-8081)
- Emrah Demir (ORCID: https://orcid.org/0000-0001-5354-2362)
- M. Taha Demirkan (ORCID: https://orcid.org/0000-0002-5041-5680)
- Emre Çetin
- Selçuk Ideci
- Ahmet Musab Beşbadem
- Aiman al Maazabi
- Nisa Hacıoğlu
Institutions
- Piri Reis University (TR)
- Gebze Technical University (TR)
- Istanbul Technical University (TR)
- Marmara University (TR)
Publication Details
- Journal
- Materials Science and Technology
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1177/02670836261508379
- Primary Topic
- Advancements in Battery Materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00