Promoting Mass Transfer in CO2-to-CO Electroreduction Reactions via Cobalt Phthalocyanine on Tannic Acid-Etched Hollow Thin-Walled Mesoporous Carbon
Electrocatalytic reduction of CO2 to CO is a key pathway for closing the carbon cycle, but molecular catalysts for this reaction are often limited by slow mass transfer and electrochemical instability. To overcome these challenges, a hollow thin-walled mesoporous nitrogen-doped carbon support (NC-H-Mes) was prepared from ZIF-8-derived solid microporous carbon via tannic acid etching to markedly enhance molecular dispersion and active area of cobalt phthalocyanine (CoPc). This architecture significantly improved mass transfer and electrochemical stability. The optimized catalyst CoPc/NC-H-Mes, with a specific surface area of 1030 m2/g, achieved a CO Faradaic efficiency of 95.9% and a CO partial current density of −18.5 mA cm–2 at a potential of −0.9 V (vs RHE) in an H-type electrolytic cell, outperforming CoPc on a solid microporous support. In situ ATR-FTIR and electrochemical resistance measurements indicated that the hollow thin-walled mesoporous structure of CoPc/NC-H-Mes accelerated reactant–product transport and stabilized local pH at the electrode–electrolyte interface. This structural feature fundamentally alleviated salt precipitation, thus promoting electrochemical stability in membrane electrode assembly (MEA).
Authors
- Jun Cheng (ORCID: https://orcid.org/0000-0003-1104-671X)
- Yi Qiu (ORCID: https://orcid.org/0000-0001-9316-0975)
- Jiahao Wang (ORCID: https://orcid.org/0009-0008-6878-3597)
- Xuechun Li
- Yuxiang Mao
- Rui Teng
- Xuxin Dong
Institutions
- Chongqing University (CN)
- Zhejiang University (CN)
Publication Details
- Journal
- Industrial & Engineering Chemistry Research
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1021/acs.iecr.6c03521
- Primary Topic
- CO2 Reduction Techniques and Catalysts
- Type
- article
- Field-Weighted Citation Impact
- 0.00