Micromechanical investigation of granular behaviour under constant radial stiffness
Geotechnical design often relies on laboratory characterisation tests such as conventional drained triaxial tests, in which soils are sheared under constant confining pressure. This boundary condition differs from many boundary-value problems where the surrounding ground restrains lateral deformation and causes confinement to evolve during loading. This study investigates the effect of radial stiffness, k , on the macroscopic and microscopic behaviour of granular assemblies under triaxial shearing using three-dimensional discrete element method (DEM) simulations. A wide range of k was imposed, covering conditions from constant confinement ( k = 0 ) to one-dimensional compression ( k → ∞ ). The results show that increasing k changes the shearing mode from a density-controlled response, through a transitional response, to a confinement-controlled response. This transition is expressed macroscopically by progressive stress-path flattening and increasing restraint of dilation, and microscopically by a more persistent load-bearing contact network in which deviatoric stress is increasingly supported by contact-force anisotropy. An illustrative shallow-footing analysis extends the DEM-derived framework to a practical boundary-value context by relating the mobilised lateral restraint to the identified granular response regimes. The study thus supports the use of constant radial stiffness as a physically meaningful element-scale boundary condition for interpreting granular behaviour under finite lateral restraint.
Authors
- Jianfeng Xue (ORCID: https://orcid.org/0000-0001-6380-1188)
- Ziheng Wang (ORCID: https://orcid.org/0009-0006-3824-0829)
- Yue Chen
- Bo Liu
Institutions
- Hong Kong Polytechnic University (HK)
- UNSW Canberra (AU)
Publication Details
- Journal
- Computers and Geotechnics
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1016/j.compgeo.2026.108834
- Primary Topic
- Geotechnical Engineering and Soil Mechanics
- Type
- article
- Field-Weighted Citation Impact
- 0.00