Regression of Pure Shear Stress–Strain Behavior in Anisotropic Thin-Walled Aluminum Tubes
Non-uniform shear strain in pure shear tests complicates the determination of shear stress–strain curves. A numerical fitting method using measured strains at multiple representative points and regression of load data is proposed for thin-walled tubes. Measured strains are substituted into an assumed stress–strain model, and the shear load is calculated by piecewise integration. Model coefficients are identified by nonlinear least squares to minimize the difference between calculated and measured loads. Axial pure shear data from a 5052 aluminum alloy tube with an outer diameter of 50 mm and a thickness of 1.2 mm are fitted using the Hollomon, Voce, and Hockett–Sherby models. Reducing representative-point spacing improves agreement with the measured response. The Hockett–Sherby model provides the closest fit among the three models. Its maximum absolute strain-range-averaged relative error is 0.74% with three representative points and 0.49% with nine points, compared with 1.68% for the average-strain method with nine points. Equivalent normal stress–strain curves converted from the fitted shear curve differ from axial and circumferential tension curves. The method accounts for the measured non-uniform strain distribution when fitting the shear response.
Authors
- Xiaosong Wang
- Shuning Zhang
- Yazhuo Zhang
- Weilong Hu
Institutions
- Harbin Institute of Technology (CN)
Publication Details
- Journal
- Materials
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/ma19224893
- Primary Topic
- Metal Forming Simulation Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00