Mining-Induced Surface Deformation Monitoring and Short-Term Prediction Using DS-InSAR and Increment-Target Spatiotemporal Learning

Mining-induced subsidence is a common geological hazard in coal mining areas, and reliable deformation monitoring is important for risk reduction. Cumulative InSAR deformation fields contain deformation accumulated during preceding periods, whereas newly occurring deformation over a short forecast horizon generally represents only a small fraction of the cumulative magnitude. Direct prediction of future cumulative deformation may therefore exploit temporal persistence to achieve relatively low mean errors while underestimating locally strong subsidence. To investigate this issue, we used 276 ascending Sentinel-1 SAR images acquired from 10 January 2020 to 11 July 2024 to perform DS-InSAR monitoring at the Wutongzhuang Mine, Hebei Province, China, and constructed 138 continuous two-dimensional cumulative vertical deformation fields. We defined three prediction tasks—cumulative-input–cumulative-output (C2C), cumulative-input–increment-output (C2D), and increment-input–increment-output (D2D)—and applied each task to CNN-PhLSTM, ConvLSTM, and VMRNN. Monitoring identified two major subsidence zones in the north-central and southwestern parts of the study area, with a maximum cumulative vertical deformation of approximately −467.96mm by 11 July 2024. The Pearson correlation of colocated PS-InSAR and DS-InSAR deformation rates was 0.88; comparison between DS-InSAR and leveling at P1 and P2 yielded a correlation of 0.9742, a mean absolute error (MAE) of 8.23 mm, and a root mean square error (RMSE) of 10.29 mm. Keeping historical cumulative deformation inputs unchanged and converting the future supervision target to deformation increments reduced the RMSEs of CNN-PhLSTM, ConvLSTM, and VMRNN by 56.48%, 12.17%, and 17.16%, respectively, with consistent improvement directions across three random seeds. Further converting historical inputs to increments produced smaller, model-dependent changes. Under the unified D2D task, VMRNN achieved the lowest mean RMSE and MAE and the highest mean R2, showing relatively favorable overall predictive performance among the compared models. Spatial predictions also show that VMRNN-D2D generally preserves the spatial structures of the major subsidence zones and local troughs, while errors are concentrated mainly in actively developing strong-subsidence areas, where subsidence magnitudes tend to be underestimated. These findings indicate that representing the future supervision target as deformation increments provides an effective strategy for improving short-term prediction of cumulative InSAR deformation across different networks.

Authors

Institutions

Publication Details

Journal
Remote Sensing
Published
2026-11-19
DOI
https://doi.org/10.3390/rs18223972
Primary Topic
Synthetic Aperture Radar (SAR) Applications and Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Mining-Induced Surface Deformation Monitoring and Short-Term Prediction Using DS-InSAR and Increment-Target Spatiotemporal Learning

Mengguang Liao, Sichun Long, Wenhao Wu, Chuanguang Zhu et al.
Remote Sensing
Synthetic Aperture Radar (SAR) Applications and Techniques
article

Mining-Induced Surface Deformation Monitoring and Short-Term Prediction Using DS-InSAR and Increment-Target Spatiotemporal Learning

Mengguang Liao, Sichun Long, Wenhao Wu, Chuanguang Zhu, Simeng Luo, Yusong Zhang
article en

Abstract

Mining-induced subsidence is a common geological hazard in coal mining areas, and reliable deformation monitoring is important for risk reduction. Cumulative InSAR deformation fields contain deformation accumulated during preceding periods, whereas newly occurring deformation over a short forecast horizon generally represents only a small fraction of the cumulative magnitude. Direct prediction of future cumulative deformation may therefore exploit temporal persistence to achieve relatively low mean errors while underestimating locally strong subsidence. To investigate this issue, we used 276 ascending Sentinel-1 SAR images acquired from 10 January 2020 to 11 July 2024 to perform DS-InSAR monitoring at the Wutongzhuang Mine, Hebei Province, China, and constructed 138 continuous two-dimensional cumulative vertical deformation fields. We defined three prediction tasks—cumulative-input–cumulative-output (C2C), cumulative-input–increment-output (C2D), and increment-input–increment-output (D2D)—and applied each task to CNN-PhLSTM, ConvLSTM, and VMRNN. Monitoring identified two major subsidence zones in the north-central and southwestern parts of the study area, with a maximum cumulative vertical deformation of approximately −467.96mm by 11 July 2024. The Pearson correlation of colocated PS-InSAR and DS-InSAR deformation rates was 0.88; comparison between DS-InSAR and leveling at P1 and P2 yielded a correlation of 0.9742, a mean absolute error (MAE) of 8.23 mm, and a root mean square error (RMSE) of 10.29 mm. Keeping historical cumulative deformation inputs unchanged and converting the future supervision target to deformation increments reduced the RMSEs of CNN-PhLSTM, ConvLSTM, and VMRNN by 56.48%, 12.17%, and 17.16%, respectively, with consistent improvement directions across three random seeds. Further converting historical inputs to increments produced smaller, model-dependent changes. Under the unified D2D task, VMRNN achieved the lowest mean RMSE and MAE and the highest mean R2, showing relatively favorable overall predictive performance among the compared models. Spatial predictions also show that VMRNN-D2D generally preserves the spatial structures of the major subsidence zones and local troughs, while errors are concentrated mainly in actively developing strong-subsidence areas, where subsidence magnitudes tend to be underestimated. These findings indicate that representing the future supervision target as deformation increments provides an effective strategy for improving short-term prediction of cumulative InSAR deformation across different networks.

Remote SensingVol. 18(22)
Hunan University of Science and Technology (CN)
Synthetic Aperture Radar (SAR) Applications and Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon