Turning demolition waste into sand and stone: a short account of a mobile sensor-controlled recycling line

Demolition waste is usually landfilled or dumped, while natural river sand grows scarce. Crushing demolition waste alone rarely yields stable aggregate, and its grading drifts with the feedstock. This short paper describes a mobile, sensor-controlled recycling line: vibrating feeder with manual picking, belt magnet, jaw crusher and vertical-shaft impactor, multi-deck screen with oversize recirculation, and water-cyclone washing with recirculation and sludge recovery. Sensors for flow, turbidity and particle size adjust feed, rotor speed, water and screening. The design reference is about 100 tonnes per day (12.5 tonnes per hour on a single 8-hour shift), with 20/10/5 mm screen apertures, a 75 mm jaw setting, a 60 m/s rotor tip speed and a 63 µm cyclone cut. It targets sand 0–5 mm and stone 5–10 and 10–20 mm; a 20–40 mm band is claimed in the dossier, but the reference line as described is not configured to produce it — that would need an additional screen deck. No pilot has been run. No measured product properties, pilot throughput, energy use, or water use are reported — none exist in the dossier. All performance figures are simulated estimates: about 90.3 tonnes per day of saleable product from 100 tonnes of feed, simulated electricity use of 3.7 kWh per tonne of feed, fresh make-up water of 0.16 m³ per tonne of feed at 93% recirculation, and simulated 28-day concrete strengths of 36.0 MPa at 20% coarse replacement and 27.0 MPa at 100% coarse replacement, against a 38.0 MPa reference.

Authors

Publication Details

Journal
Engineering Archive (engrXiv)
Published
2026-11-19
DOI
https://doi.org/10.31224/8836
Primary Topic
Recycled Aggregate Concrete Performance
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Turning demolition waste into sand and stone: a short account of a mobile sensor-controlled recycling line

Duong Van Sinh
Engineering Archive (engrXiv)
Recycled Aggregate Concrete Performance
preprint

Turning demolition waste into sand and stone: a short account of a mobile sensor-controlled recycling line

Duong Van Sinh
preprint en

Abstract

Demolition waste is usually landfilled or dumped, while natural river sand grows scarce. Crushing demolition waste alone rarely yields stable aggregate, and its grading drifts with the feedstock. This short paper describes a mobile, sensor-controlled recycling line: vibrating feeder with manual picking, belt magnet, jaw crusher and vertical-shaft impactor, multi-deck screen with oversize recirculation, and water-cyclone washing with recirculation and sludge recovery. Sensors for flow, turbidity and particle size adjust feed, rotor speed, water and screening. The design reference is about 100 tonnes per day (12.5 tonnes per hour on a single 8-hour shift), with 20/10/5 mm screen apertures, a 75 mm jaw setting, a 60 m/s rotor tip speed and a 63 µm cyclone cut. It targets sand 0–5 mm and stone 5–10 and 10–20 mm; a 20–40 mm band is claimed in the dossier, but the reference line as described is not configured to produce it — that would need an additional screen deck. No pilot has been run. No measured product properties, pilot throughput, energy use, or water use are reported — none exist in the dossier. All performance figures are simulated estimates: about 90.3 tonnes per day of saleable product from 100 tonnes of feed, simulated electricity use of 3.7 kWh per tonne of feed, fresh make-up water of 0.16 m³ per tonne of feed at 93% recirculation, and simulated 28-day concrete strengths of 36.0 MPa at 20% coarse replacement and 27.0 MPa at 100% coarse replacement, against a 38.0 MPa reference.

Engineering Archive (engrXiv)
Recycled Aggregate Concrete Performance
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon