Effects of Forebody Vortex Ingestion on the Flow Characteristics of a Top-Mounted Twin S-Shaped Inlet
To investigate outlet distortion and vortex-system coupling associated with forebody vortex ingestion in an unmanned aerial vehicle (UAV) top-mounted twin S-shaped inlet, three-dimensional steady Reynolds-averaged Navier–Stokes simulations were performed at H = 20 km and Ma∞ = 0.6. In the baseline inlet without the forebody, counter-rotating corner vortices form near the lower wall and developed into a four-vortex pattern under Dean-type secondary flow, producing distinct low-total-pressure regions at the aerodynamic interface plane (AIP). With the forebody included, the dominant forebody vortex was reorganized near the inlet entrance, and the resulting structures entered the duct and interact with the lower-wall vortex system, increasing outlet-flow asymmetry. Compared with the baseline case, the AIP total-pressure recovery coefficient decreased from 0.969 to 0.947, the circumferential total-pressure distortion index DC60 increased from 0.156 to 0.382, and the swirl intensity (SI) increased from 2.74° to 3.09°.
Authors
- Hexia Huang (ORCID: https://orcid.org/0000-0001-5193-6384)
- Jin Zhe-min (ORCID: https://orcid.org/0009-0006-5226-4464)
- Huijun Tan (ORCID: https://orcid.org/0000-0001-5125-7605)
- Zhihong Zhou
- Zhengkang Lin (ORCID: https://orcid.org/0009-0004-5310-7458)
- Jingbin XIE
- Baohua Zhao
- Ding Gao
- Shu Sun
Institutions
- Nanjing University of Aeronautics and Astronautics (CN)
Publication Details
- Journal
- Aerospace
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/aerospace13111084
- Primary Topic
- Computational Fluid Dynamics and Aerodynamics
- Type
- article
- Field-Weighted Citation Impact
- 0.00