Parametric design selection and ambient experimental assessment of a beryllium-copper spiral flexure spring for long-life Stirling cryocooler compressors
Free-piston Stirling cryocoolers require flexure suspensions that combine low axial stiffness, high radial stiffness, modal separation, manufacturability and long cyclic endurance. This study reports a constrained, one-factor-at-a-time parametric screening procedure for a three-arm spiral flexure disc, followed by ambient experimental assessment of the selected design. Six candidate alloys (AISI 302, AISI 304, Be-Cu C17000, Be-Cu C17200 TH, Ti-6Al-4V and AMPCOLOY® 944) and five geometric variables (arm count, spiral-cut width, sweep angle, disc thickness and disc diameter) were screened using nonlinear static structural, modal and stress-life finite element analyses in ANSYS® Workbench, with photo-etch manufacturability treated as a hard feasibility constraint. The selected configuration was Be-Cu C17200 TH, three arms, 0.6 mm cut width, 0.7 mm disc thickness, 560° sweep, 69 mm diameter and ±5 mm design stroke. For the selected design, analytical, numerical and experimental axial stiffness values were 1495.00, 1451.45 and 1460.25 N/m, respectively; the three routes agreed within 3%, while FEA and experiment differed by 0.6%. Measured and predicted strain agreed within 3%–7% across the stroke. An ambient fatigue campaign reached 100,755,000 fully reversed cycles at ±5 mm and 50 Hz without detected crack initiation, exceeding the adopted 10 8 -cycle run-out criterion by 0.76%. This result is a run-out at one stress level rather than a statistical infinite-life demonstration. Cryogenic mechanical qualification, direct radial-stiffness measurement, and a formal global multi-objective optimisation remain outside the present evidence base.
Authors
- Virendra K. Bhojwani (ORCID: https://orcid.org/0000-0001-5031-5914)
- Suraj Bhoyar (ORCID: https://orcid.org/0000-0002-8592-8988)
- Pralhad Tipole (ORCID: https://orcid.org/0000-0001-6569-753X)
- Rakesh Sidheshware (ORCID: https://orcid.org/0000-0002-3168-085X)
- Sunil Kulkarni
Institutions
- University of Dayton (US)
- MIT Art, Design and Technology University (IN)
Publication Details
- Journal
- Frontiers in Mechanical Engineering
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3389/fmech.2026.1958177
- Primary Topic
- Mechanical Engineering and Vibrations Research
- Type
- article
- Field-Weighted Citation Impact
- 0.00