Microplastic fiber release from woven synthetic fabrics during washing: structural and mechanical drivers of shedding
Laundering synthetic textiles is a major pathway for microplastic fiber (MPF) release, yet the fabric-level structural and mechanical factors controlling shedding remain insufficiently understood. This study investigated MPF release from eight woven continuous-filament synthetic fabrics, including virgin polyester (PET), recycled polyester (rPET), polyamide (PA), PA/PET, and PA/elastane fabrics with plain, twill, and satin constructions. Standardized washing tests were performed according to ISO 4484–1:2023, and MPF release was assessed using mass-based, count-based, and fiber-length metrics. Among the tested fabrics, PET2 and rPET exhibited the highest normalized MPF release, at 31.67 and 30.74 MPFs/g, respectively, whereas PET3 and PET4 showed the lowest release, at 9.51 and 8.48 MPFs/g. These results suggest that fabric openness, yarn density, weave structure, and fiber origin may influence MPF shedding. Notably, rPET released approximately 2.3-fold more MPFs/g than structurally comparable PET1, indicating that recycled polyester may behave differently during laundering even when fabric construction is similar. Fiber-length distributions further indicated differences in fragmentation behavior, with rPET, PET3, and PET4 producing greater proportions of short fibers (<0.5 mm). Exploratory PCA, with the first two components explaining 65.1% of the total variance, suggested that MPF release was associated with yarn density, fabric compactness, binding coefficient, and mechanical response rather than polymer composition alone. These findings demonstrate that MPF shedding from woven synthetic fabrics is governed by multiscale interactions between fabric structure and mechanical behavior and highlight opportunities to reduce MPF release through textile design.
Authors
- Ramón Artiaga (ORCID: https://orcid.org/0000-0003-2506-7263)
- Rossana Bellopede (ORCID: https://orcid.org/0000-0002-9569-0678)
- Sinem Hazal Akyıldız (ORCID: https://orcid.org/0000-0002-8346-5895)
- Jorge López‐Beceiro (ORCID: https://orcid.org/0000-0001-6438-3520)
- Mercedes Pereira
Institutions
- Universidade da Coruña (ES)
- Politecnico di Torino (IT)
Publication Details
- Journal
- Frontiers in Materials
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3389/fmats.2026.1891868
- Primary Topic
- Microplastics and Plastic Pollution
- Type
- article
- Field-Weighted Citation Impact
- 0.00