Model-based assessment of thoracic load transmission and local cortical bone stress under posterior manual loading: a whole spine–thorax finite element study

The thoracic spine and rib cage form a coupled load-bearing system, but internal thoracic stress transmission under posterior manual loading remains difficult to quantify experimentally. This preclinical computational study aimed to evaluate thoracic load transmission, whole-model stress and​ deformation, and local cortical bone stress under controlled posterior manual thoracic loading conditions. Finite element simulations were performed using a previously developed whole spine–thorax model with consistent boundary conditions and quantified mechanical inputs. Six palm-based posterior thoracic loading patterns were simulated under T6 spinous-process loading using experimentally measured mean peak loads and mean equivalent contact areas. Under the superimposed palm–palm-root loading condition, T6 spinous-process loading was compared with left paravertebral loading at T6 under identical loading parameters. Progressive loading was then performed under the representative left paravertebral condition to evaluate local cortical-bone stress concentration and identify the external load at which the predefined 90 MPa reference criterion was reached. Different experimentally defined posterior thoracic loading scenarios produced different whole-model stress and deformation responses. The double-palm condition had the highest measured peak load and also produced the largest whole-model maximum von Mises equivalent stress and maximum total deformation. Compared with T6 spinous-process loading, left paravertebral loading produced a more loaded-side-concentrated stress distribution and lower whole-model maximum von Mises equivalent stress and maximum total deformation. Under progressive loading, high-stress cortical bone regions were mainly concentrated in the upper ribs. The predefined 90 MPa cortical-bone reference criterion was reached at an external load of approximately 730 N. Posterior manual thoracic loading produced distinct whole-model and local cortical bone responses across experimentally defined loading scenarios and force-application sites. The differences among loading patterns were observed under experimentally defined combinations of peak load, contact area, and loading geometry and should not be interpreted as independent effects of these individual parameters. These findings provide model-specific biomechanical evidence for interpreting thoracic stress distribution and regional osseous stress concentration under posterior manual loading.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-19
DOI
https://doi.org/10.1038/s41598-026-80687-8
Primary Topic
Spinal Fractures and Fixation Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Model-based assessment of thoracic load transmission and local cortical bone stress under posterior manual loading: a whole spine–thorax finite element study

Fucheng Zhang, Junhua Li, Zhanyu Liang, Qinghui Feng et al.
Scientific Reports
Spinal Fractures and Fixation Techniques
article

Model-based assessment of thoracic load transmission and local cortical bone stress under posterior manual loading: a whole spine–thorax finite element study

Fucheng Zhang, Junhua Li, Zhanyu Liang, Qinghui Feng, Jie Zhang, Yaoshuai Yu, Yueran Wang, Lixin Tang, Yikai Li, Yang Ye, Jian Meng, Zhili Hu, Wenxi Liao, Jiale Yang
article en

Abstract

The thoracic spine and rib cage form a coupled load-bearing system, but internal thoracic stress transmission under posterior manual loading remains difficult to quantify experimentally. This preclinical computational study aimed to evaluate thoracic load transmission, whole-model stress and​ deformation, and local cortical bone stress under controlled posterior manual thoracic loading conditions. Finite element simulations were performed using a previously developed whole spine–thorax model with consistent boundary conditions and quantified mechanical inputs. Six palm-based posterior thoracic loading patterns were simulated under T6 spinous-process loading using experimentally measured mean peak loads and mean equivalent contact areas. Under the superimposed palm–palm-root loading condition, T6 spinous-process loading was compared with left paravertebral loading at T6 under identical loading parameters. Progressive loading was then performed under the representative left paravertebral condition to evaluate local cortical-bone stress concentration and identify the external load at which the predefined 90 MPa reference criterion was reached. Different experimentally defined posterior thoracic loading scenarios produced different whole-model stress and deformation responses. The double-palm condition had the highest measured peak load and also produced the largest whole-model maximum von Mises equivalent stress and maximum total deformation. Compared with T6 spinous-process loading, left paravertebral loading produced a more loaded-side-concentrated stress distribution and lower whole-model maximum von Mises equivalent stress and maximum total deformation. Under progressive loading, high-stress cortical bone regions were mainly concentrated in the upper ribs. The predefined 90 MPa cortical-bone reference criterion was reached at an external load of approximately 730 N. Posterior manual thoracic loading produced distinct whole-model and local cortical bone responses across experimentally defined loading scenarios and force-application sites. The differences among loading patterns were observed under experimentally defined combinations of peak load, contact area, and loading geometry and should not be interpreted as independent effects of these individual parameters. These findings provide model-specific biomechanical evidence for interpreting thoracic stress distribution and regional osseous stress concentration under posterior manual loading.

Scientific Reports
Hangzhou Red Cross Hospital (CN), Anyang Hospital of Traditional Chinese Medicine (CN), Southern Medical University (CN), Guangzhou Medical University (CN)
Spinal Fractures and Fixation Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon