Hole Quality Comparison in Drilling 7075-T6 Aluminum Alloy Using Untreated and Selectively Borided Twist Drills: A Preliminary Case Study

This research presents a comparative study of burr width, diametral deviation, and surface roughness (Ra) of blind holes drilled in 7075-T6 aluminum alloy using commercial AISI M2 high-speed steel twist drills, both untreated and selectively borided. The selective boriding thermochemical treatment was applied at 1223 K for 2 and 4 h, and the resulting boride layers were characterized by optical microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). One drill bit per condition was subjected to a 1200-hole drilling sequence, from which 148 longitudinally sampled holes per completed run (determined via G*Power) were evaluated using descriptive statistics, the Kolmogorov–Smirnov normality test, the Mann–Whitney U test, and Pearson and Spearman correlation analyses. The 4 h test was stopped after 14 holes due to early coating delamination, indicating a potential thickness threshold. Over the 1200-hole drilling sequence, the 2 h selectively borided drill bit exhibited lower mean surface roughness Ra (2.98 µm vs. 14.70 µm) and lower mean diametral deviation (0.010 mm vs. 0.037 mm) than the untreated drill bit, alongside a moderately larger mean burr width (0.076 mm vs. 0.059 mm). Post-test SEM-EDS analysis indicated that adhesion and abrasion were the predominant wear mechanisms.

Authors

Institutions

Publication Details

Journal
Coatings
Published
2026-11-19
DOI
https://doi.org/10.3390/coatings16111377
Primary Topic
Advanced machining processes and optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Hole Quality Comparison in Drilling 7075-T6 Aluminum Alloy Using Untreated and Selectively Borided Twist Drills: A Preliminary Case Study

Eduardo Bastida-Escamilla, M. Elías-Espinosa, Marco Antonio Doñu Ruíz, Noé López Perrusquia et al.
Coatings
Advanced machining processes and optimization
article

Hole Quality Comparison in Drilling 7075-T6 Aluminum Alloy Using Untreated and Selectively Borided Twist Drills: A Preliminary Case Study

Eduardo Bastida-Escamilla, M. Elías-Espinosa, Marco Antonio Doñu Ruíz, Noé López Perrusquia, Aline Hernández, Leopoldo García-Vanegas
article en

Abstract

This research presents a comparative study of burr width, diametral deviation, and surface roughness (Ra) of blind holes drilled in 7075-T6 aluminum alloy using commercial AISI M2 high-speed steel twist drills, both untreated and selectively borided. The selective boriding thermochemical treatment was applied at 1223 K for 2 and 4 h, and the resulting boride layers were characterized by optical microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). One drill bit per condition was subjected to a 1200-hole drilling sequence, from which 148 longitudinally sampled holes per completed run (determined via G*Power) were evaluated using descriptive statistics, the Kolmogorov–Smirnov normality test, the Mann–Whitney U test, and Pearson and Spearman correlation analyses. The 4 h test was stopped after 14 holes due to early coating delamination, indicating a potential thickness threshold. Over the 1200-hole drilling sequence, the 2 h selectively borided drill bit exhibited lower mean surface roughness Ra (2.98 µm vs. 14.70 µm) and lower mean diametral deviation (0.010 mm vs. 0.037 mm) than the untreated drill bit, alongside a moderately larger mean burr width (0.076 mm vs. 0.059 mm). Post-test SEM-EDS analysis indicated that adhesion and abrasion were the predominant wear mechanisms.

CoatingsVol. 16(11)
Universidad Anáhuac (MX), Polytechnic University of the Valley of Mexico (MX), Tecnológico de Monterrey (MX)
Advanced machining processes and optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon