Influence of urban view factors on seasonal outdoor thermal conditions: implications for sustainable residential neighbourhood design in hot semi-arid climates

Purpose Urban geometry plays a critical role in shaping the thermal environment of cities, particularly in hot and semi-arid climates. While the Sky View Factor (SVF) is widely used to represent urban openness, it does not fully capture the complexity of urban form. Existing studies often overlook the combined influence of built and vegetative components on urban microclimates. Design/methodology/approach This study addresses this gap by quantifying the role of SVF, Building View Factor (BVF), and Tree View Factor (TVF) across residential areas and examining their spatial and temporal influence across Local Climate Zones (LCZs) on air temperature and thermal comfort. The analysis was conducted across 11 residential neighbourhoods in Jaipur, India, covering 66 locations of interest. Micrometeorological and morphological data were collected during summer and winter at 14:00 and 20:00, representing peak heating and nocturnal cooling periods. Findings SVF showed a weak positive association with air temperature during summer and winter daytime (r = 0.11–0.27), reversing to a moderate negative association at winter night (r = −0.335). BVF exhibited weak negative daytime associations (r = −0.11 and −0.07) but a moderate positive association at winter night (r = 0.417), indicating restricted nocturnal cooling. TVF remained weakly negative across conditions (r = −0.04 to −0.18). PET showed substantially stronger associations, particularly for SVF and BVF during summer daytime (r = 0.770 and −0.580) and winter night (r = −0.440 and 0.550). Areas with SVF below 0.5, particularly those with SVF values of 0.25–0.50, exhibited improved thermal conditions. Research limitations/implications This study is limited to residential neighbourhoods in Jaipur, a hot semi-arid city, which may affect the generalizability of the findings. Measurements were conducted during two seasons at two observation times. Future studies should include different climatic regions, longer monitoring periods, synchronized multi-point measurements, and additional factors such as vegetation characteristics and material properties to improve understanding of urban thermal environments. Practical implications The study highlights the need to integrate key radiative indicators such as SVF, BVF, and TVF into climate-responsive urban design. Incorporating these parameters into development control regulations can help predict thermal comfort and support the design of streets that mitigate heat and enhance outdoor livability. Social implications Improving urban design using SVF, BVF, and TVF can make outdoor spaces cooler and more comfortable for people, especially during extreme heat. This can reduce heat stress, improve public health, and encourage more outdoor activities. Originality/value This study represents the first systematic attempt to evaluate outdoor thermal comfort conditions in residential neighbourhoods with varying geometric configurations (SVF, BVF, and TVF) within the hot semi-arid climate (BSh) of Jaipur, India.

Authors

Institutions

Publication Details

Journal
Smart and Sustainable Built Environment
Published
2026-11-20
DOI
https://doi.org/10.1108/sasbe-03-2026-0256
Primary Topic
Urban Heat Island Mitigation
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Influence of urban view factors on seasonal outdoor thermal conditions: implications for sustainable residential neighbourhood design in hot semi-arid climates

Archana Singh, Sanjay Mathur, Tarush Chandra, Jyotirmay Mathur
Smart and Sustainable Built Environment
Urban Heat Island Mitigation
article

Influence of urban view factors on seasonal outdoor thermal conditions: implications for sustainable residential neighbourhood design in hot semi-arid climates

Archana Singh, Sanjay Mathur, Tarush Chandra, Jyotirmay Mathur
article en

Abstract

Purpose Urban geometry plays a critical role in shaping the thermal environment of cities, particularly in hot and semi-arid climates. While the Sky View Factor (SVF) is widely used to represent urban openness, it does not fully capture the complexity of urban form. Existing studies often overlook the combined influence of built and vegetative components on urban microclimates. Design/methodology/approach This study addresses this gap by quantifying the role of SVF, Building View Factor (BVF), and Tree View Factor (TVF) across residential areas and examining their spatial and temporal influence across Local Climate Zones (LCZs) on air temperature and thermal comfort. The analysis was conducted across 11 residential neighbourhoods in Jaipur, India, covering 66 locations of interest. Micrometeorological and morphological data were collected during summer and winter at 14:00 and 20:00, representing peak heating and nocturnal cooling periods. Findings SVF showed a weak positive association with air temperature during summer and winter daytime (r = 0.11–0.27), reversing to a moderate negative association at winter night (r = −0.335). BVF exhibited weak negative daytime associations (r = −0.11 and −0.07) but a moderate positive association at winter night (r = 0.417), indicating restricted nocturnal cooling. TVF remained weakly negative across conditions (r = −0.04 to −0.18). PET showed substantially stronger associations, particularly for SVF and BVF during summer daytime (r = 0.770 and −0.580) and winter night (r = −0.440 and 0.550). Areas with SVF below 0.5, particularly those with SVF values of 0.25–0.50, exhibited improved thermal conditions. Research limitations/implications This study is limited to residential neighbourhoods in Jaipur, a hot semi-arid city, which may affect the generalizability of the findings. Measurements were conducted during two seasons at two observation times. Future studies should include different climatic regions, longer monitoring periods, synchronized multi-point measurements, and additional factors such as vegetation characteristics and material properties to improve understanding of urban thermal environments. Practical implications The study highlights the need to integrate key radiative indicators such as SVF, BVF, and TVF into climate-responsive urban design. Incorporating these parameters into development control regulations can help predict thermal comfort and support the design of streets that mitigate heat and enhance outdoor livability. Social implications Improving urban design using SVF, BVF, and TVF can make outdoor spaces cooler and more comfortable for people, especially during extreme heat. This can reduce heat stress, improve public health, and encourage more outdoor activities. Originality/value This study represents the first systematic attempt to evaluate outdoor thermal comfort conditions in residential neighbourhoods with varying geometric configurations (SVF, BVF, and TVF) within the hot semi-arid climate (BSh) of Jaipur, India.

Smart and Sustainable Built Environment
Malaviya National Institute of Technology Jaipur (IN)
Urban Heat Island Mitigation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon