Thermal Homogenization of Hot Mix Asphalt Agglomerates by Remixing in a Material Transfer Vehicle: A Transient Heat-Conduction Analysis
This study analyzes how remixing in a Material Transfer Vehicle (MTV) reduces thermal segregation of hot mix asphalt (HMA): after remixing, colder agglomerates surrounded by hotter HMA equalize by heat conduction. Transient conduction in cubic agglomerates of 2, 3, and 4 cm was modeled with a finite-conductivity model and a lumped-capacitance-type model, both at a Biot number of 0.5. The calculation was verified by oven-heating tests on two 4 cm cubic AC 8 S 50/70 specimens at the same Biot number: the finite-conductivity model reproduced the measured center temperature with a root-mean-square error of 2.0 °C, whereas the lumped model overpredicted it by 12.8 °C. The time to eliminate 90% of the initial temperature difference is 12, 28, and 50 min for 2, 3, and 4 cm agglomerates; a three-dimensional numerical analysis shows that perfect contact shortens these times by 1.5–2 times and that a cold-material fraction of 9–16% reduces the local temperature difference after 10–20 min by a further 10–50%. Equalization of 2 cm agglomerates within about 10 min is comparable with the estimated 5–20 min residence time in an MTV, whereas 4 cm agglomerates retain about 40% of it after 20 min. These conditional model results require field verification.
Authors
- P. Mieczkowski (ORCID: https://orcid.org/0000-0003-2128-5327)
- Mieczysław Słowik (ORCID: https://orcid.org/0000-0001-8049-591X)
Institutions
- West Pomeranian University of Technology in Szczecin (PL)
- Poznań University of Technology (PL)
Publication Details
- Journal
- Materials
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/ma19224910
- Primary Topic
- Asphalt Pavement Performance Evaluation
- Type
- article
- Field-Weighted Citation Impact
- 0.00