Infill Pattern Selection for Topology-Optimised FDM Beams: The Limits of Homogenised Finite-Element Screening

Infill patterns for load-bearing printed parts are often chosen with little evidence, and a homogenised finite-element model calibrated from the slicer toolpath is the natural screening tool. We measured where such a model stops being reliable, using a topology-optimised Messerschmitt–Bölkow–Blohm beam with cubic, gyroid and honeycomb infill at two densities. The reference is a road-resolved model of every deposited toolpath; no beam was tested mechanically. Three limits appear. First, inputs: skipping arc moves without updating the position inflates the gyroid orientation input in all four slicers tested, and the nominal density setting hides almost all of the pattern difference. Second, the core law: a scalar density law falls 8 to 20% below the reference and loses the difference between cubic and gyroid, while a homogenised tensor removes this error. Third, resolution: with a tensor core and dense material of the correct thickness, stiffness agrees with the reference within 5 to 7%, yet cubic and honeycomb cannot be separated. Omitting the solid layers about halves the stiffness. Weaker bonding between layers keeps the pattern order. These results apply to one beam and to linear elasticity. The data and code are openly available.

Authors

Institutions

Publication Details

Journal
Applied Sciences
Published
2026-11-19
DOI
https://doi.org/10.3390/app162211482
Primary Topic
Topology Optimization in Engineering
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Infill Pattern Selection for Topology-Optimised FDM Beams: The Limits of Homogenised Finite-Element Screening

Abdulrahman Ahmed A. Alymani, Libish Murugesan, Yara Moeid Al Enezi
Applied Sciences
Topology Optimization in Engineering
article

Infill Pattern Selection for Topology-Optimised FDM Beams: The Limits of Homogenised Finite-Element Screening

Abdulrahman Ahmed A. Alymani, Libish Murugesan, Yara Moeid Al Enezi
article en

Abstract

Infill patterns for load-bearing printed parts are often chosen with little evidence, and a homogenised finite-element model calibrated from the slicer toolpath is the natural screening tool. We measured where such a model stops being reliable, using a topology-optimised Messerschmitt–Bölkow–Blohm beam with cubic, gyroid and honeycomb infill at two densities. The reference is a road-resolved model of every deposited toolpath; no beam was tested mechanically. Three limits appear. First, inputs: skipping arc moves without updating the position inflates the gyroid orientation input in all four slicers tested, and the nominal density setting hides almost all of the pattern difference. Second, the core law: a scalar density law falls 8 to 20% below the reference and loses the difference between cubic and gyroid, while a homogenised tensor removes this error. Third, resolution: with a tensor core and dense material of the correct thickness, stiffness agrees with the reference within 5 to 7%, yet cubic and honeycomb cannot be separated. Omitting the solid layers about halves the stiffness. Weaker bonding between layers keeps the pattern order. These results apply to one beam and to linear elasticity. The data and code are openly available.

Applied SciencesVol. 16(22)
Alfaisal University (SA)
Topology Optimization in Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon