Industrial Scale Thermal Consolidation of Heterogeneous Mixed Plastic Waste with Integrated Combustion Support and Exhaust Gas Treatment

The principal objective of this research is to demonstrate the technical feasibility of converting intact bales of heterogeneous, contaminated mixed-plastic waste into cohesive solid blocks through controlled thermal consolidation, without conventional washing, shredding, sorting or polymer separation. Heterogeneous contaminated mixed-plastic waste is difficult to recover using conventional routes requiring sorting, washing, shredding or feedstock homogenisation. This study evaluates an author-developed industrial-scale system combining one-step indirect thermal consolidation and gravity-assisted compression with integrated process-gas extraction, combustion support and exhaust treatment. The combustion support and exhaust treatment module (CSET) is connected to an internal combustion engine (ICE): reactor gases, vapours and condensate are conveyed through a manifold and pre-CSET modules to engine air intakes, while engine exhaust passes through a post-CSET assembly. The engine also drives the generator supplying electricity to the heaters. This integrated configuration provides a proposed pathway for transport and high-temperature treatment of potentially PFAS-associated material; PFAS mineralisation and exhaust-treatment efficiency were not demonstrated. Full-scale developmental trials recorded temperature, vertical settlement, electrical consumption and physical cohesion. In the principal quantified trial (Bake 5), 351.6 kg of incoming material was processed for 213 h using 296.50 kWh of measured electrical energy. The recovered solid weighed 275.2 kg (78.27% mass retention), corresponding to 0.843 kWh/kg incoming material. A discrete 194 mm settlement was associated with strap release and cannot be attributed solely to thermal consolidation. Recovered sections were cohesive but heterogeneous, with an irregular upper face and loose peripheral material. The experimental findings demonstrate that full-scale mixed-plastic bales can undergo measurable thermal consolidation while retaining sufficient cohesion to permit removal and subsequent cutting. The research does not seek to establish the structural certification of manufactured products or experimental proof of PFAS mineralisation, which represent separate stages of development requiring dedicated material-performance and analytical validation. The central research question is whether heterogeneous, contaminated plastic waste can be consolidated into a manageable solid form without conventional preprocessing. The full-scale trials provide preliminary experimental evidence that this is technically achievable. The potential relevance to Sustainable Development Goals 9 and 12 lies in reduced-preprocessing resource recovery, subject to further validation.

Authors

Publication Details

Journal
Research Square
Published
2026-11-19
DOI
https://doi.org/10.21203/rs.3.rs-11733131/v1
Primary Topic
Municipal Solid Waste Management
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Industrial Scale Thermal Consolidation of Heterogeneous Mixed Plastic Waste with Integrated Combustion Support and Exhaust Gas Treatment

Brett Head, Brett Jason Head
Research Square
Municipal Solid Waste Management
preprint

Industrial Scale Thermal Consolidation of Heterogeneous Mixed Plastic Waste with Integrated Combustion Support and Exhaust Gas Treatment

Brett Head, Brett Jason Head
preprint en

Abstract

The principal objective of this research is to demonstrate the technical feasibility of converting intact bales of heterogeneous, contaminated mixed-plastic waste into cohesive solid blocks through controlled thermal consolidation, without conventional washing, shredding, sorting or polymer separation. Heterogeneous contaminated mixed-plastic waste is difficult to recover using conventional routes requiring sorting, washing, shredding or feedstock homogenisation. This study evaluates an author-developed industrial-scale system combining one-step indirect thermal consolidation and gravity-assisted compression with integrated process-gas extraction, combustion support and exhaust treatment. The combustion support and exhaust treatment module (CSET) is connected to an internal combustion engine (ICE): reactor gases, vapours and condensate are conveyed through a manifold and pre-CSET modules to engine air intakes, while engine exhaust passes through a post-CSET assembly. The engine also drives the generator supplying electricity to the heaters. This integrated configuration provides a proposed pathway for transport and high-temperature treatment of potentially PFAS-associated material; PFAS mineralisation and exhaust-treatment efficiency were not demonstrated. Full-scale developmental trials recorded temperature, vertical settlement, electrical consumption and physical cohesion. In the principal quantified trial (Bake 5), 351.6 kg of incoming material was processed for 213 h using 296.50 kWh of measured electrical energy. The recovered solid weighed 275.2 kg (78.27% mass retention), corresponding to 0.843 kWh/kg incoming material. A discrete 194 mm settlement was associated with strap release and cannot be attributed solely to thermal consolidation. Recovered sections were cohesive but heterogeneous, with an irregular upper face and loose peripheral material. The experimental findings demonstrate that full-scale mixed-plastic bales can undergo measurable thermal consolidation while retaining sufficient cohesion to permit removal and subsequent cutting. The research does not seek to establish the structural certification of manufactured products or experimental proof of PFAS mineralisation, which represent separate stages of development requiring dedicated material-performance and analytical validation. The central research question is whether heterogeneous, contaminated plastic waste can be consolidated into a manageable solid form without conventional preprocessing. The full-scale trials provide preliminary experimental evidence that this is technically achievable. The potential relevance to Sustainable Development Goals 9 and 12 lies in reduced-preprocessing resource recovery, subject to further validation.

Research Square
Municipal Solid Waste Management
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon