Hydrodynamic–Structural Interaction and Transverse Seismic Response of a 1000-Ton-Class Navigable Aqueduct with Thin-Walled Piers
Large navigable aqueducts are key components of high-capacity inland waterway infrastructure, in which a massive water-carrying trough is supported by relatively high, thin-walled piers. This study investigates hydrodynamic–structural interaction and transverse seismic response of a 1000-ton-class navigable aqueduct. A three-dimensional ABAQUS model was developed, with the contained water represented by an equivalent spring–mass formulation and cross-checked against a coupled Eulerian–Lagrangian model. Modal and nonlinear time-history analyses were used to examine seismic-demand distribution, water effects, and response differences between 16 m dual-channel and 55 m single-channel configurations. Larger transverse displacements occur at sampled upper-trough locations, whereas shear-force and bending-moment demands increase toward the supporting system and peak at the pier bottom. Under the selected artificial ground motion, filling the 16 m trough to 5.5 m increases peak displacement and acceleration by up to 37.05% and 94.38%, respectively, while local stress amplification is strongly position-dependent. The 55 m configuration shows substantially larger displacement but only moderate acceleration increases. These results highlight nonuniform hydrodynamic modification and complementary deformation–force demand patterns in large water-carrying navigation structures under seismic excitation.
Authors
- Chenxi Qin (ORCID: https://orcid.org/0000-0003-0080-7499)
- Xuanhai Tang
- Duoyin Wang
- Jiawei Shao
- Zhihong Wu
Institutions
- NingboTech University (CN)
- Chongqing Jiaotong University (CN)
Publication Details
- Journal
- Journal of Marine Science and Engineering
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/jmse14222205
- Primary Topic
- Seismic Performance and Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00