Analysis of the postoperative mechanical properties of PEEK bone plates in a distal femoral fracture model
Distal femoral fractures suffer high complication risks induced by stress shielding of high-modulus titanium locking plates. This work aimed to compare the biomechanical performance of four PEEK-series plates and titanium alloy implants for distal femoral fracture fixation, and establish material selection strategy. A Sawbones synthetic femur was fabricated into a comminuted fracture model. Four locking plates including pure PEEK, toughened CFR-PEEK, layered anisotropic PEEK and titanium alloy were analyzed via finite element simulation and 1000 N axial compression tests. Results showed that structural stiffness saturated at 20–110 GPa: modulus elevation from 6 to 20 GPa brought 28.4% stiffness improvement, while modulus increasing to 110 GPa only gained extra 9.8% stiffness. Toughened CFR-PEEK presented structural stiffness similar to titanium plates (femoral head displacement: 0.75 mm vs 0.69 mm), and lower stress shielding (peri-fracture bone stress: 40.2 MPa vs 30.9 MPa). Layered anisotropic PEEK suffered excessive plate stress (683.5 MPa) and unstable deformation, while pure PEEK lacked bearing capacity. In conclusion, toughened CFR-PEEK with elastic modulus above 20 GPa is a qualified substitute for titanium plates, which can balance fixation stability and stress shielding reduction for distal femoral fracture treatment. The research results propose a new approach to selecting bone plate materials: for isotropic materials, selecting an elastic modulus within the stiffness saturation range can achieve mechanical properties comparable to those of traditional metal bone plates while mitigating the stress shielding effect; for anisotropic materials, improving flexural strength can enhance structural stiffness while also mitigating the stress shielding effect.
Authors
- Maoyan Jie (ORCID: https://orcid.org/0009-0008-6798-9059)
- Sherri Gambill
- Yali Zhang (ORCID: https://orcid.org/0000-0002-7773-0752)
- Xiaogang Zhang (ORCID: https://orcid.org/0000-0003-4608-5401)
- Hongxing Shi
- Tongyu Wu
- Zhongmin Jin
Institutions
- Invibio Limited (United Kingdom) (GB)
- Southwest Jiaotong University (CN)
Publication Details
- Journal
- Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1177/09544119261502246
- Primary Topic
- Bone fractures and treatments
- Type
- article
- Field-Weighted Citation Impact
- 0.00