Comparative mechanical and physicochemical characterization of MoNbSiTiW refractory high-entropy alloys synthesized by hot-press sintering and vacuum arc melting
This study compares the effects of processing route on the phase constitution, mechanical properties, and physicochemical characteristics of equiatomic MoNbSiTiW refractory high-entropy alloys (RHEAs) produced by mechanical alloying followed by hot-press sintering (MA + HPS) and vacuum arc melting (VAM). Mechanical alloying produced nanocrystalline powders containing a metastable body-centered cubic (BCC) phase and transient silicides. After processing, the alloys consisted primarily of a BCC phase with Nb 5 Si 3 silicide. The MA + HPS alloy exhibited a finer, more homogeneous microstructure and a more uniform silicide distribution, together with high microhardness (1120 ± 5 HV), a low wear rate, and improved oxidation resistance at 1000 °C. In contrast, the VAM alloy exhibited a coarse dendritic microstructure and silicide segregation but showed higher compressive strength (~1960 MPa), greater fracture strain (~12%), and better corrosion resistance in NaCl solution. These results demonstrate that processing route influences the measured properties of the alloy in different ways. The observed differences are discussed in relation to phase constitution, microstructural heterogeneity, relative density, and possible oxidation-scale formation. The findings show that the behavior of processing-dependent silicide morphology, distribution, and densification is very critical in controlling the strength-ductility balance, wear resistance, oxidation kinetics, and corrosion behavior. Thus, the processing route provides a means of tailoring the phase stability and multifunctional properties of MoNbSiTiW RHEAs for high-temperature and structural applications.
Authors
- Kavita Sahu
- Ankur Jaiswal (ORCID: https://orcid.org/0000-0001-6013-5917)
- Om Prakash Tenduwe (ORCID: https://orcid.org/0000-0002-6900-2667)
- Divya Shukla
- Pawan Kumar Patnaik
- Anil Kumar
Institutions
- Manipal Academy of Higher Education (IN)
- Chhattisgarh Swami Vivekanand Technical University (IN)
- Indian Institute of Technology Bhilai (IN)
Publication Details
- Journal
- PLoS ONE
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1371/journal.pone.0362671
- Primary Topic
- High Entropy Alloys Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00