Hybrid fiber reinforced composite pipes for offshore service: a critical review of fabrication and mechanical performance
Hybrid fiber-reinforced composite pipes are increasingly considered for offshore service instead of metallic pipes, but adoption is limited by fabrication variability, interface-dominated failure, and qualification frameworks that overlook hybrid architectures. This review covers fabrication routes, defect signatures, mechanical performance, fatigue, finite element modeling, and offshore standards. Hybridization is not inherently beneficial: stacking sequence alters strength at a fixed carbon-to-glass ratio, greater intralayer fiber dispersion may reduce tensile strength, and hybrid pipes in bending matched, rather than exceeded, all-carbon or all-glass failure loads. Fatigue and finite element models remain calibrated mainly at coupon scale, while load transfer and cohesive-zone parameters lack full-scale validation, as a preliminary three-dimensional carbon/glass/basalt pipe model under internal pressure shows. ISO 14692 covers only glass-reinforced plastics, DNV-ST-F119 excludes thermoset and ceramic matrix systems, and API 15S is limited to flowlines under pressure and reeling. Hybrid pipes therefore need project-specific testing within a composite-component framework.
Authors
- Wong Chee Fui
- Sara Lee Kit Yee
- Emadaddin Abdo Alazzani
- Lay Sheng Ewe
Institutions
- Universiti Tunku Abdul Rahman Sungai Long Campus (MY)
- Universiti Tenaga Nasional (MY)
- Tunku Abdul Rahman University of Management and Technology (MY)
Publication Details
- Journal
- Ships and Offshore Structures
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1080/17445302.2026.2765696
- Primary Topic
- Mechanical Behavior of Composites
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Tenaga Nasional Berhad
- Universiti Tenaga Nasional