Effective photocatalytic degradation of dye mixtures using Ni doped SnO₂ nanoparticles under simulated sunlight

This study presents the hydrothermal synthesis and characterization of pure and Ni doped SnO2 nanoparticles with different doping concentrations (2, 4, and 8%). The impact of Ni doping concentration on the structure, morphology, and optical properties was examined. The photocatalysts were evaluated for the potential degradation of individual and mixed methylene blue (MB) and methyl orange (MO) dyes. Both pure and Ni doped SnO2 exhibit a tetragonal rutile structure, and the particle size decreases as the Ni concentration increases. N₂ adsorption–desorption analysis revealed an increase in the specific surface area and pore volume upon Ni doping, providing more accessible surface sites for photocatalytic reactions. Optical absorption analysis showed a red shift of the energy band gap as the Ni concentration increased up to 4% and a blue shift of 8%, which revealed that the material's nanosize influences the energy band gap. The surface composition and oxidation states of pure and doped samples were verified by XPS. FESEM images showed that Ni doping transformed the irregular, elongated SnO₂ grains into finer and more uniform quasi-spherical nanoparticles. Photoluminescence analysis showed a decrease in emission intensity upon Ni incorporation, suggesting suppressed radiative recombination of photogenerated electron–hole pairs. The incorporation of Ni in the SnO2 samples significantly improved the simultaneous removal of MB and MO from their binary mixture. Moreover, boost photocatalytic selectivity in decomposing MO and MB in a mixed solution. The 4% Ni doped SnO2 showed high photocatalytic efficiencies of 89 and 93% under simulated sunlight for MB and MO, respectively, after 70 min of simulated sunlight irradiation, compared with approximately 40% and 75% for undoped SnO₂. Scavenger experiments revealed the existence of hydroxyl radicals as the main reactive species responsible for the for the degradation of both dyes over the 4% Ni doped SnO₂ catalyst. The 4% Ni doped SnO₂ photocatalyst also exhibited good recyclability, maintaining high photocatalytic activity after five consecutive cycles. These results indicate that Ni doped SnO₂ is a promising photocatalyst for the treatment of mixed cationic/anionic dye solutions, although validation with real textile effluents is still required.

Authors

Institutions

Publication Details

Journal
Physica Scripta
Published
2026-11-18
DOI
https://doi.org/10.1088/1402-4896/aec3e6
Primary Topic
Advanced Photocatalysis Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effective photocatalytic degradation of dye mixtures using Ni doped SnO₂ nanoparticles under simulated sunlight

Zinab H. Bakr, A. Z. Mahmoud, Dalia Ali
2 links
Physica Scripta
Advanced Photocatalysis Techniques
article

Effective photocatalytic degradation of dye mixtures using Ni doped SnO₂ nanoparticles under simulated sunlight

Zinab H. Bakr, A. Z. Mahmoud, Dalia Ali
article en

Abstract

This study presents the hydrothermal synthesis and characterization of pure and Ni doped SnO2 nanoparticles with different doping concentrations (2, 4, and 8%). The impact of Ni doping concentration on the structure, morphology, and optical properties was examined. The photocatalysts were evaluated for the potential degradation of individual and mixed methylene blue (MB) and methyl orange (MO) dyes. Both pure and Ni doped SnO2 exhibit a tetragonal rutile structure, and the particle size decreases as the Ni concentration increases. N₂ adsorption–desorption analysis revealed an increase in the specific surface area and pore volume upon Ni doping, providing more accessible surface sites for photocatalytic reactions. Optical absorption analysis showed a red shift of the energy band gap as the Ni concentration increased up to 4% and a blue shift of 8%, which revealed that the material's nanosize influences the energy band gap. The surface composition and oxidation states of pure and doped samples were verified by XPS. FESEM images showed that Ni doping transformed the irregular, elongated SnO₂ grains into finer and more uniform quasi-spherical nanoparticles. Photoluminescence analysis showed a decrease in emission intensity upon Ni incorporation, suggesting suppressed radiative recombination of photogenerated electron–hole pairs. The incorporation of Ni in the SnO2 samples significantly improved the simultaneous removal of MB and MO from their binary mixture. Moreover, boost photocatalytic selectivity in decomposing MO and MB in a mixed solution. The 4% Ni doped SnO2 showed high photocatalytic efficiencies of 89 and 93% under simulated sunlight for MB and MO, respectively, after 70 min of simulated sunlight irradiation, compared with approximately 40% and 75% for undoped SnO₂. Scavenger experiments revealed the existence of hydroxyl radicals as the main reactive species responsible for the for the degradation of both dyes over the 4% Ni doped SnO₂ catalyst. The 4% Ni doped SnO₂ photocatalyst also exhibited good recyclability, maintaining high photocatalytic activity after five consecutive cycles. These results indicate that Ni doped SnO₂ is a promising photocatalyst for the treatment of mixed cationic/anionic dye solutions, although validation with real textile effluents is still required.

Physica Scripta
Assiut University (EG)
Advanced Photocatalysis Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon