Numerical Simulation Study on One-Dimensional Critical Flow in Pipes Under Phase Change Conditions

Critical flow widely appears in industrial scenarios, particularly within pressurized two-phase facilities and upon rupture/leakage of pressure vessels and pipes. Investigations into critical flow provide quantitative data for predictive process analysis. To analyze the critical flow phenomenon in pipelines, this paper establishes a one-dimensional two-phase critical flow calculation model. In this model, the Clausius–Clapeyron equation is adopted to calculate the phase change boundary, and the variable relaxation coefficient modified-Lee model proposed in this paper is employed to determine the source term. The model was validated using 38 sets of axial pressure distribution and 75 sets of mass flow rate from circular pipes and narrow slit channels under different pressures, temperatures, and geometric dimensions. The results show that the model achieves favorable computational performance, with average prediction errors of 11.39% and 6.45% for the two, respectively. Based on this model, the axial distribution of each parameter and the influence of initial parameters were analyzed. The results show that affected by the void fraction, the axial gradient variations of each parameter reach the maximum at the outlet, among which the acceleration pressure drop gradually becomes dominant with the development of flow. An increase in initial temperature leads to a rise in outlet pressure but reduces the ratio of outlet pressure to onset of boiling pressure. The influence of initial pressure can be divided into two cases: Under subcooled conditions, an increase in initial pressure suppresses vapor generation while raising the outlet pressure. Under saturated conditions, the ratio of outlet pressure to saturation pressure is a constant value independent of initial pressure, and the outlet void fraction first increases and then decreases with the rise of initial pressure.

Authors

Institutions

Publication Details

Journal
Nuclear Science and Engineering
Published
2026-11-18
DOI
https://doi.org/10.1080/00295639.2026.2751337
Primary Topic
Nuclear Engineering Thermal-Hydraulics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Numerical Simulation Study on One-Dimensional Critical Flow in Pipes Under Phase Change Conditions

B. Long, Liangguo Li, Antai Liu, Xiaohang Wu et al.
Nuclear Science and Engineering
Nuclear Engineering Thermal-Hydraulics
article

Numerical Simulation Study on One-Dimensional Critical Flow in Pipes Under Phase Change Conditions

B. Long, Liangguo Li, Antai Liu, Xiaohang Wu, Zhen Chen, Haijun Wang
article en

Abstract

Critical flow widely appears in industrial scenarios, particularly within pressurized two-phase facilities and upon rupture/leakage of pressure vessels and pipes. Investigations into critical flow provide quantitative data for predictive process analysis. To analyze the critical flow phenomenon in pipelines, this paper establishes a one-dimensional two-phase critical flow calculation model. In this model, the Clausius–Clapeyron equation is adopted to calculate the phase change boundary, and the variable relaxation coefficient modified-Lee model proposed in this paper is employed to determine the source term. The model was validated using 38 sets of axial pressure distribution and 75 sets of mass flow rate from circular pipes and narrow slit channels under different pressures, temperatures, and geometric dimensions. The results show that the model achieves favorable computational performance, with average prediction errors of 11.39% and 6.45% for the two, respectively. Based on this model, the axial distribution of each parameter and the influence of initial parameters were analyzed. The results show that affected by the void fraction, the axial gradient variations of each parameter reach the maximum at the outlet, among which the acceleration pressure drop gradually becomes dominant with the development of flow. An increase in initial temperature leads to a rise in outlet pressure but reduces the ratio of outlet pressure to onset of boiling pressure. The influence of initial pressure can be divided into two cases: Under subcooled conditions, an increase in initial pressure suppresses vapor generation while raising the outlet pressure. Under saturated conditions, the ratio of outlet pressure to saturation pressure is a constant value independent of initial pressure, and the outlet void fraction first increases and then decreases with the rise of initial pressure.

Nuclear Science and Engineering
China Nuclear Power Technology Research Institute (China) (CN), Xi'an Jiaotong University (CN)
Nuclear Engineering Thermal-Hydraulics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon