A Superconducting Nanowire Single-Photon Detector: Efficiency, Dark Count, Jitter and Dead-Time Budgets from Computed Detection Physics
Counting single photons at fibre wavelengths demands a detector that fires on almost every arriving photon, adds almost no false counts of its own, and stamps each arrival with picosecond precision. Operating principle: a superconducting nanowire biased just below its critical current, in which the absorption of one photon creates a resistive hotspot that diverts the bias current and produces a voltage pulse. The nanowire detector reaches a detection efficiency of 92 percent at a wavelength of 1550 nanometres, with a timing jitter of 25 picoseconds and a dark count rate of 10 counts per second. The nanowire counts nearly every photon it receives while contributing only a handful of false counts each second, which is the combination that makes faint-light sensing and fibre communication diagnostics practical. SIMULATED, NOT MEASURED. This is a computed study for a civilian sensing purpose: the device serves imaging, sensing, communications or illumination, and it carries no targeting or weapon application against any person, state or terrestrial object.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-18
- DOI
- https://doi.org/10.5281/zenodo.24336827
- Primary Topic
- Superconducting and THz Device Technology
- Type
- article
- Field-Weighted Citation Impact
- 0.00