Influence of thermoset injection molding process parameters and surface structure on magnet-polymer adhesion in hybrid components for axial flux machines

The reliable large-scale manufacturing of thermoset-molded magnet-polymer hybrid components is essential for the industrial application of axial flux machines. This study investigates the influence of magnet preheating temperature as well as different surface topologies on interfacial integrity, geometry, curing degree, glass transition temperature and mechanical properties of hybrid components. The molded parts comprise of segmented NdFeB magnets and short carbon fiber reinforced phenolic molding compound. For validation, a quantitative characterization method was developed combining dye penetrant testing with automated image processing to localize and determine interfacial delamination. The method achieved a repeatability standard deviation of 0.97% and an inter-operator intraclass correlation coefficient of 0.904. By increasing the magnet preheating temperature from 50 °C to 150 °C the local curing degree and interfacial delamination increased. The interfacial delamination increased by 0.157%/°C and the push-out force decreased by 0.028 kN/°C. Significant effects of the surface topology were seen regarding both delamination and component failure load. Anti-corrosion coated and abrasive blasted magnet inserts showed delamination levels of 48% respectively 70%. A linear laser structure with a depth of 90 μm reduced delamination below the detection limit. Additionally, the maximum push-out force was increased from 23 kN to 115 kN. Failure shifted from interfacial adhesion failure to predominantly cohesive failure within the magnet and phenolic part. This indicates that the measured push-out force represents a lower bound for the interfacial load capacity. The results demonstrate that controlling curing-induced shrinkage and introducing mechanically interlocking surface structures are decisive for improving the integrity of NdFeB/phenolic hybrid components.

Authors

Institutions

Publication Details

Journal
Advanced Composites and Hybrid Materials
Published
2026-11-18
DOI
https://doi.org/10.1007/s42114-026-02178-8
Primary Topic
Injection Molding Process and Properties
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Influence of thermoset injection molding process parameters and surface structure on magnet-polymer adhesion in hybrid components for axial flux machines

Bernd Schilder, Ralf Huber, Robin Sujatta, Volker Schoeppner
Advanced Composites and Hybrid Materials
Injection Molding Process and Properties
article

Influence of thermoset injection molding process parameters and surface structure on magnet-polymer adhesion in hybrid components for axial flux machines

Bernd Schilder, Ralf Huber, Robin Sujatta, Volker Schoeppner
article en

Abstract

The reliable large-scale manufacturing of thermoset-molded magnet-polymer hybrid components is essential for the industrial application of axial flux machines. This study investigates the influence of magnet preheating temperature as well as different surface topologies on interfacial integrity, geometry, curing degree, glass transition temperature and mechanical properties of hybrid components. The molded parts comprise of segmented NdFeB magnets and short carbon fiber reinforced phenolic molding compound. For validation, a quantitative characterization method was developed combining dye penetrant testing with automated image processing to localize and determine interfacial delamination. The method achieved a repeatability standard deviation of 0.97% and an inter-operator intraclass correlation coefficient of 0.904. By increasing the magnet preheating temperature from 50 °C to 150 °C the local curing degree and interfacial delamination increased. The interfacial delamination increased by 0.157%/°C and the push-out force decreased by 0.028 kN/°C. Significant effects of the surface topology were seen regarding both delamination and component failure load. Anti-corrosion coated and abrasive blasted magnet inserts showed delamination levels of 48% respectively 70%. A linear laser structure with a depth of 90 μm reduced delamination below the detection limit. Additionally, the maximum push-out force was increased from 23 kN to 115 kN. Failure shifted from interfacial adhesion failure to predominantly cohesive failure within the magnet and phenolic part. This indicates that the measured push-out force represents a lower bound for the interfacial load capacity. The results demonstrate that controlling curing-induced shrinkage and introducing mechanically interlocking surface structures are decisive for improving the integrity of NdFeB/phenolic hybrid components.

Advanced Composites and Hybrid Materials
Mercedes-Benz (Germany) (DE), Paderborn University (DE)
Injection Molding Process and Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon