Investigation of the microstructure and mechanical properties of duplex stainless steel and AISI 4140 steel joined by the diffusion bonding method using MBF-51 interlayer

In this study, AISI 4140 low-alloy steel and duplex stainless steel were joined using a diffusion welding method with an MBF-51-based amorphous nickel interlayer. The effects of diffusion temperature (1000, 1050, and 1100 °C) and holding time (30 and 60 minutes) on the microstructure and mechanical properties of the weld zone were investigated. The obtained samples were characterized by optical microscopy, SEM/EDS, and XRD analyses; the microhardness distribution of the weld zone was also determined, and shear strength tests were performed. Microstructure examinations showed that increasing temperature and holding time significantly improved elemental diffusion between the interlayer and the base materials, resulting in a more homogeneous weld zone. XRD analyses revealed the formation of α-Fe, γ-Ni (Fe–Ni solid solution), Ni 3 B, Ni 3 Si, CrB, Cr 2 B, Cr 3 C 2 , and Ni 3 C phases in the diffusion zone. Microhardness measurements revealed that the interlayer hardness reached higher values than the base materials due to the boride and carbide phases formed in the diffusion zone. Shear strength results showed that the bond strength continuously increased with increasing diffusion temperature and holding time; the highest shear strength was obtained in the sample held at 1100 °C for 60 minutes. In conclusion, it was determined that the MBF-51 interlayer successfully joined AISI 4140 steel and duplex stainless steel by diffusion welding, and that the 1100 °C/60 minute process parameters were the most suitable conditions in terms of microstructural integrity and mechanical performance.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
Published
2026-11-18
DOI
https://doi.org/10.1177/09544089261507169
Primary Topic
Advanced Welding Techniques Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Investigation of the microstructure and mechanical properties of duplex stainless steel and AISI 4140 steel joined by the diffusion bonding method using MBF-51 interlayer

Bülent Kurt, Bekir Güney, Serkan Dal
Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
Advanced Welding Techniques Analysis
article

Investigation of the microstructure and mechanical properties of duplex stainless steel and AISI 4140 steel joined by the diffusion bonding method using MBF-51 interlayer

Bülent Kurt, Bekir Güney, Serkan Dal
article en

Abstract

In this study, AISI 4140 low-alloy steel and duplex stainless steel were joined using a diffusion welding method with an MBF-51-based amorphous nickel interlayer. The effects of diffusion temperature (1000, 1050, and 1100 °C) and holding time (30 and 60 minutes) on the microstructure and mechanical properties of the weld zone were investigated. The obtained samples were characterized by optical microscopy, SEM/EDS, and XRD analyses; the microhardness distribution of the weld zone was also determined, and shear strength tests were performed. Microstructure examinations showed that increasing temperature and holding time significantly improved elemental diffusion between the interlayer and the base materials, resulting in a more homogeneous weld zone. XRD analyses revealed the formation of α-Fe, γ-Ni (Fe–Ni solid solution), Ni 3 B, Ni 3 Si, CrB, Cr 2 B, Cr 3 C 2 , and Ni 3 C phases in the diffusion zone. Microhardness measurements revealed that the interlayer hardness reached higher values than the base materials due to the boride and carbide phases formed in the diffusion zone. Shear strength results showed that the bond strength continuously increased with increasing diffusion temperature and holding time; the highest shear strength was obtained in the sample held at 1100 °C for 60 minutes. In conclusion, it was determined that the MBF-51 interlayer successfully joined AISI 4140 steel and duplex stainless steel by diffusion welding, and that the 1100 °C/60 minute process parameters were the most suitable conditions in terms of microstructural integrity and mechanical performance.

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
Nevşehir Hacı Bektaş Veli University (TR), Karamanoğlu Mehmetbey University (TR)
Advanced Welding Techniques Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon