Comparative Study on the Behavior and Vibratory Cavitation Erosion Resistance of GTAW Hardened Versus Artificially Aged (180°C, 1-Hour) Structures of Rolled Aluminum Alloy 5083
The qualities of aluminum alloys, which feature a specific mass approximately 2.5 times lower than that of low-alloy carbon steels yet possess comparable mechanical properties, have prompted researchers to explore their potential for use in components operating under conditions different from those typically encountered. Components such as motorboat propellers and cooling pump rotors in internal combustion engines, for instance, work under erosive conditions caused by cavitation. In this context, the results presented in this paper were obtained through vibratory cavitation testing of rolled aluminum alloy 5083, whose surface was hardened by GTAW remelting. Analysis of the results and evaluation of cavitation resistance—compared with the same alloy in its semifinished and artificially aged state at 180°C with a one-hour dwell time—support the GTAW method as an effective technique for enhancing the alloy’s resistance to the erosive stresses induced by cavitation.
Authors
- Ilare Bordeașu (ORCID: https://orcid.org/0000-0003-3580-8168)
- Cristian Ghera (ORCID: https://orcid.org/0000-0001-7512-6896)
- Cornelia Laura Sălcianu (ORCID: https://orcid.org/0000-0002-9106-3757)
- Denis Andrei Predu (ORCID: https://orcid.org/0009-0002-1704-0212)
- Raluca Faur
Institutions
- Polytechnic University of Timişoara (RO)
- National Institute for Research and Development in Welding and Material Testing (RO)
Publication Details
- Journal
- Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena
- Published
- 2026-11-18
- DOI
- https://doi.org/10.4028/p-c1bhq0
- Primary Topic
- Metallurgy and Material Science
- Type
- article
- Field-Weighted Citation Impact
- 0.00