Design Optimization of Surface Ionization Detectors for Quantitative Online Alkali Monitoring

Real-time measurements of alkali species are important in thermochemical conversion processes, where Na- and K-containing compounds influence reaction chemistry, bed agglomeration, deposition, and corrosion. Surface ionization detectors (SIDs) have long provided a simple approach to online alkali monitoring, but most reported SIDs have remained semiquantitative because internal transport and ion-collection processes are insufficiently understood. Here, a reconfigurable SID was used to determine how detector orientation, filament placement, and collector design control the response, with the aim of establishing design principles and selecting a configuration for more quantitative measurements. Experiments were interpreted using computational fluid dynamics and a first-order electrostatic model. The results distinguish two coupled processes: buoyancy-driven transport of neutral alkali to the hot Pt filament and subsequent electrostatic ion collection. Among the configurations investigated, horizontal operation with a dead-leg insert, an axially mounted filament, and a grounded plate collector provided the best balance of sensitivity, stability, baseline recovery, and practical operability. Under identical KCl pulse conditions, this configuration produced an approximately fourfold higher plateau response than the earlier SID configuration. Calibration with eight common Na- and K-containing salts showed strongly compound-dependent sensitivity, following chlorides ≳ hydroxides > carbonates ≫ sulfates; on a molar alkali basis, K compounds produced higher responses than the corresponding Na compounds. These results provide a mechanistic basis for SID design and compound-specific calibration, strengthening SID as a more quantitatively interpretable online alkali-monitoring method while showing that absolute quantification requires knowledge of, or calibration representative of, alkali composition.

Authors

Institutions

Publication Details

Journal
Energy & Fuels
Published
2026-11-19
DOI
https://doi.org/10.1021/acs.energyfuels.6c05221
Primary Topic
Mass Spectrometry Techniques and Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Optimization of Surface Ionization Detectors for Quantitative Online Alkali Monitoring

Viktor Andersson, Thomas Allgurén, Klas Andersson, Jan B. C. Pettersson et al.
Energy & Fuels
Mass Spectrometry Techniques and Applications
article

Design Optimization of Surface Ionization Detectors for Quantitative Online Alkali Monitoring

Viktor Andersson, Thomas Allgurén, Klas Andersson, Jan B. C. Pettersson, Pavleta Knutsson, Saumitra Mishra
article en

Abstract

Real-time measurements of alkali species are important in thermochemical conversion processes, where Na- and K-containing compounds influence reaction chemistry, bed agglomeration, deposition, and corrosion. Surface ionization detectors (SIDs) have long provided a simple approach to online alkali monitoring, but most reported SIDs have remained semiquantitative because internal transport and ion-collection processes are insufficiently understood. Here, a reconfigurable SID was used to determine how detector orientation, filament placement, and collector design control the response, with the aim of establishing design principles and selecting a configuration for more quantitative measurements. Experiments were interpreted using computational fluid dynamics and a first-order electrostatic model. The results distinguish two coupled processes: buoyancy-driven transport of neutral alkali to the hot Pt filament and subsequent electrostatic ion collection. Among the configurations investigated, horizontal operation with a dead-leg insert, an axially mounted filament, and a grounded plate collector provided the best balance of sensitivity, stability, baseline recovery, and practical operability. Under identical KCl pulse conditions, this configuration produced an approximately fourfold higher plateau response than the earlier SID configuration. Calibration with eight common Na- and K-containing salts showed strongly compound-dependent sensitivity, following chlorides ≳ hydroxides > carbonates ≫ sulfates; on a molar alkali basis, K compounds produced higher responses than the corresponding Na compounds. These results provide a mechanistic basis for SID design and compound-specific calibration, strengthening SID as a more quantitatively interpretable online alkali-monitoring method while showing that absolute quantification requires knowledge of, or calibration representative of, alkali composition.

Energy & Fuels
Chalmers University of Technology (SE), University of Gothenburg (SE)
European Commission, Vetenskapsrådet, Energimyndigheten
Mass Spectrometry Techniques and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon