Thermoelectric Behavior of Copper Sulfides in Lignin-Based Polymer Matrices
Thermoelectricity has become one of the most promising solutions to address the global energy crisis by waste heat recovery, and this is commonly achieved by using a thermoelectric generator (TEG). Additive manufacturing (AM) of TEGs has gained attention in recent years. Fused deposition modeling (FDM) is one of the most economical AM techniques. In FDM, the thermoelectric materials are mixed with polymers to form 3D-printing filaments; therefore, the product is a hybrid thermoelectric polymer composite. In this work, copper sulfides (the thermoelectric component) were mixed into a polymer matrix of lignin and poly(lactic acid) (PLA) at different compositions (30–60% polymer content), and the behavior of the resulting composites was studied. The highest power factor, obtained for the composite with 30% polymer content, was 0.444 µW m−1 K−2. The power factor decreased as the polymer content increased, and at 60% polymer content the composites no longer exhibited measurable thermoelectric properties.
Authors
- Rafael Muñoz‐Espí (ORCID: https://orcid.org/0000-0002-8146-2332)
- Mario Culebras (ORCID: https://orcid.org/0000-0001-9244-9347)
- Clara M. Gómez (ORCID: https://orcid.org/0000-0002-7743-0389)
- Seong Yuen Tong (ORCID: https://orcid.org/0009-0004-3171-7386)
Institutions
- Universitat de València (ES)
Publication Details
- Journal
- Polymers
- Published
- 2026-11-18
- DOI
- https://doi.org/10.3390/polym18222897
- Primary Topic
- Advanced Thermoelectric Materials and Devices
- Type
- article
- Field-Weighted Citation Impact
- 0.00