Traceable Metrological Digital Twin for Robot-Based 3D Inspection: Calibration, Uncertainty Propagation, and Cross-Validation

Digital Twins (DTs) are increasingly employed in manufacturing to support simulation, monitoring, and control tasks, but their use in dimensional metrology requires explicit traceability and uncertainty information. This work develops a traceable DT for robot-based 3D inspection by integrating an industrial articulated robot with a laser-line triangulation sensor. The methodology combines robot kinematic identification, optical-sensor characterization, sensor-to-robot referencing, and a machine-readable representation of the calibrated metrological state. Uncertainties associated with the calibrated parameters are propagated through the complete measurement chain using a Monte Carlo method aligned with the Guide to the Expression of Uncertainty in Measurement (GUM). Validation combines a CMM-characterized four-sphere artifact and a geo-metrically complex part. For the complex part, two complementary cross-validation routes are considered: dense-surface comparison against a calibrated Triple Scan reference and feature-level comparison against CMM/VCMM reference values and task-specific uncertainties over 67 evaluated characteristics. The results support the use of the DT to generate uncertainty-enriched point clouds while also showing that feature-dependent systematic differences are not fully represented by global point-cloud statistics. The current validation is restricted to the environmental conditions and short-term stability of the experimental campaign; thermal drift and long-term stability are not included in the present model. The proposed framework therefore provides a basis for traceable, uncertainty-aware robot-based inspection and for subsequent industrial qualification under variable operating conditions.

Authors

Institutions

Publication Details

Journal
Metrology
Published
2026-11-18
DOI
https://doi.org/10.3390/metrology6040088
Primary Topic
Advanced Measurement and Metrology Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Traceable Metrological Digital Twin for Robot-Based 3D Inspection: Calibration, Uncertainty Propagation, and Cross-Validation

Jon Flores, Brahim Ahmed Chekh Oumar, Naiara Ortega Rodríguez, Björn Hemming et al.
1 links
Metrology
Advanced Measurement and Metrology Techniques
article

Traceable Metrological Digital Twin for Robot-Based 3D Inspection: Calibration, Uncertainty Propagation, and Cross-Validation

Jon Flores, Brahim Ahmed Chekh Oumar, Naiara Ortega Rodríguez, Björn Hemming, Linus Teir, Pablo Puerto, A. Reguera García
article en

Abstract

Digital Twins (DTs) are increasingly employed in manufacturing to support simulation, monitoring, and control tasks, but their use in dimensional metrology requires explicit traceability and uncertainty information. This work develops a traceable DT for robot-based 3D inspection by integrating an industrial articulated robot with a laser-line triangulation sensor. The methodology combines robot kinematic identification, optical-sensor characterization, sensor-to-robot referencing, and a machine-readable representation of the calibrated metrological state. Uncertainties associated with the calibrated parameters are propagated through the complete measurement chain using a Monte Carlo method aligned with the Guide to the Expression of Uncertainty in Measurement (GUM). Validation combines a CMM-characterized four-sphere artifact and a geo-metrically complex part. For the complex part, two complementary cross-validation routes are considered: dense-surface comparison against a calibrated Triple Scan reference and feature-level comparison against CMM/VCMM reference values and task-specific uncertainties over 67 evaluated characteristics. The results support the use of the DT to generate uncertainty-enriched point clouds while also showing that feature-dependent systematic differences are not fully represented by global point-cloud statistics. The current validation is restricted to the environmental conditions and short-term stability of the experimental campaign; thermal drift and long-term stability are not included in the present model. The proposed framework therefore provides a basis for traceable, uncertainty-aware robot-based inspection and for subsequent industrial qualification under variable operating conditions.

MetrologyVol. 6(4)
National metrology institute VTT MIKES (FI), University of the Basque Country (ES), Ideko (Spain) (ES), Tekniker (ES), Fundación Teknon (ES)
European Association of National Metrology Institutes, Eusko Jaurlaritza
Advanced Measurement and Metrology Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon