Stage‐Specific Pressure Programming Decouples Low‐Pressure Sulfur Reduction From High‐Pressure Interfacial Reconstruction in All‐Solid‐State Lithium–Sulfur Batteries

The commercialization of all‐solid‐state Li–S batteries (ASSLSBs) remains constrained by the “impossible trinity” between high energy density, long cycle life, and low stack pressure. Here we show that stack pressure is not merely a static mechanical boundary, but a stage‐specific regulator of sulfur conversion and interfacial reconstruction. Using a static pressure‐resistance‐overpotential (P‐R‐η) operational threshold algorithm, low‐stack‐pressure operation is predicted feasible for 50 wt% S cathodes. Further operando electrochemical measurements and multiscale chemical and structural characterizations reveal that 1 MPa discharge promotes Li 2 S 2 ‐rich interfacial intermediates. However, constant low‐pressure cycling induces progressive pore filling that prolongs charge transport pathways, leading to inactive Li X S accumulation and triphase interfacial contact losses. State‐resolved very‐small‐angle neutron scattering (VSANS) further uncovers a ∼5 nm structural feature that persists after low‐stack‐pressure discharge, which specifically diminishes upon high‐pressure charging. Guided by this mechanism, we implement a pressure‐programmed protocol combining 1 MPa discharge with 180 MPa charge. The resulting cell retains 98.8% of capacity after 100 cycles at 30 °C. This work establishes a dynamic pressure modulation strategy towards alleviating the “impossible trinity” by decoupling the asymmetric pressure‐electrochemical behaviors.

Authors

Institutions

Publication Details

Journal
Advanced Materials
Published
2026-11-18
DOI
https://doi.org/10.1002/adma.75779
Primary Topic
Advanced Battery Materials and Technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Stage‐Specific Pressure Programming Decouples Low‐Pressure Sulfur Reduction From High‐Pressure Interfacial Reconstruction in All‐Solid‐State Lithium–Sulfur Batteries

Xueping Gao, Taisen Zuo, Peng Chen, Likun Zhou et al.
8 links
Advanced Materials
Advanced Battery Materials and Technologies
article

Stage‐Specific Pressure Programming Decouples Low‐Pressure Sulfur Reduction From High‐Pressure Interfacial Reconstruction in All‐Solid‐State Lithium–Sulfur Batteries

Xueping Gao, Taisen Zuo, Peng Chen, Likun Zhou, Zixuan Bi, He Cheng, Rui Gao, Zhongjun Hou, Yating Zhang, Chen Zhao, Yuan Jiang
article en

Abstract

The commercialization of all‐solid‐state Li–S batteries (ASSLSBs) remains constrained by the “impossible trinity” between high energy density, long cycle life, and low stack pressure. Here we show that stack pressure is not merely a static mechanical boundary, but a stage‐specific regulator of sulfur conversion and interfacial reconstruction. Using a static pressure‐resistance‐overpotential (P‐R‐η) operational threshold algorithm, low‐stack‐pressure operation is predicted feasible for 50 wt% S cathodes. Further operando electrochemical measurements and multiscale chemical and structural characterizations reveal that 1 MPa discharge promotes Li 2 S 2 ‐rich interfacial intermediates. However, constant low‐pressure cycling induces progressive pore filling that prolongs charge transport pathways, leading to inactive Li X S accumulation and triphase interfacial contact losses. State‐resolved very‐small‐angle neutron scattering (VSANS) further uncovers a ∼5 nm structural feature that persists after low‐stack‐pressure discharge, which specifically diminishes upon high‐pressure charging. Guided by this mechanism, we implement a pressure‐programmed protocol combining 1 MPa discharge with 180 MPa charge. The resulting cell retains 98.8% of capacity after 100 cycles at 30 °C. This work establishes a dynamic pressure modulation strategy towards alleviating the “impossible trinity” by decoupling the asymmetric pressure‐electrochemical behaviors.

Advanced Materials
Chinese Academy of Sciences (CN), Nankai University (CN), China Spallation Neutron Source (CN), Institute of High Energy Physics (AT), Institute of High Energy Physics (CN)
National Natural Science Foundation of China, Basic and Applied Basic Research Foundation of Guangdong Province
Affordable and clean energy
Advanced Battery Materials and Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon