Process-constrained design and SOI MPW fabrication of a mode-matched MEMS vibrating ring gyroscope

This study presents a process-constrained design, analytical modeling and Silicon-on-Insulator (SOI) multi-project wafer (MPW) fabrication of a Vibrating Ring Gyroscope (VRG). The SoI design rules mandated peripheral anchors and prohibited central supports. A dual-concentric ring architecture interconnected through semicircular flexures was developed to preserve modal symmetry. To maintain fabrication compliance, the radius and width of semicircular flexures were optimised to match the constraints of SOI process. The curved geometry allows vibrations in drive and sense modes. The novelty in design is the inclined plates of drive and sense masses to achieve higher overlap. Finite element analysis predicts near-mode-matched drive and sense frequencies of 110.95 kHz and 110.98 kHz (∆ f = 30 Hz). Electrostatic and squeeze-film damping modeling predict drive amplitude of 1.95 µm, scale factor of 7.95 nm at 1 rad/sec input rate, scale factor of 2.88 aF/(deg/s), quality factor of 2140 and ARW of 0.0432 o /√(hr). Fabrication using a three-mask SOI process with deep reactive ion etching (DRIE) demonstrated dimensional deviation below 2\%.

Authors

Institutions

Publication Details

Journal
Journal of Micromanufacturing
Published
2026-11-17
DOI
https://doi.org/10.1177/25165984261499592
Primary Topic
Advanced MEMS and NEMS Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Process-constrained design and SOI MPW fabrication of a mode-matched MEMS vibrating ring gyroscope

Vinay Venkataram, Venkatesh K. P. Rao
Journal of Micromanufacturing
Advanced MEMS and NEMS Technologies
article

Process-constrained design and SOI MPW fabrication of a mode-matched MEMS vibrating ring gyroscope

Vinay Venkataram, Venkatesh K. P. Rao
article en

Abstract

This study presents a process-constrained design, analytical modeling and Silicon-on-Insulator (SOI) multi-project wafer (MPW) fabrication of a Vibrating Ring Gyroscope (VRG). The SoI design rules mandated peripheral anchors and prohibited central supports. A dual-concentric ring architecture interconnected through semicircular flexures was developed to preserve modal symmetry. To maintain fabrication compliance, the radius and width of semicircular flexures were optimised to match the constraints of SOI process. The curved geometry allows vibrations in drive and sense modes. The novelty in design is the inclined plates of drive and sense masses to achieve higher overlap. Finite element analysis predicts near-mode-matched drive and sense frequencies of 110.95 kHz and 110.98 kHz (∆ f = 30 Hz). Electrostatic and squeeze-film damping modeling predict drive amplitude of 1.95 µm, scale factor of 7.95 nm at 1 rad/sec input rate, scale factor of 2.88 aF/(deg/s), quality factor of 2140 and ARW of 0.0432 o /√(hr). Fabrication using a three-mask SOI process with deep reactive ion etching (DRIE) demonstrated dimensional deviation below 2\%.

Journal of Micromanufacturing
Birla Institute of Technology and Science, Pilani (IN)
Advanced MEMS and NEMS Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon