IoT-SCADA Integrated Deep Learning Model for Leak Detection in Fluid Transportation Networks
Purpose: This study aims to develop an Internet of Things (IoT) driven fluid transportation monitoring and control system integrated with a deep learning-based leak detection model, addressing the persistent challenge of leakage caused by ageing pipelines, corrosion, and operational errors. Design/Methodology/Approach: A hydraulic transportation network incorporating transducers, a programmable logic controller (PLC) and a Supervisory Control and Data Acquisition (SCADA) system was modelled and simulated to emulate leak and no-leak scenarios under varying operating conditions. Each sample is a steady-state snapshot of 20 transducer readings (pressure, flow rate, temperature and vibration measured at five stations along the flow direction). The dataset of 866 samples (351 no-leak, 515 leak) was split into 766 training samples and a 100-sample hold-out test set with class proportions matching the full dataset. A compact 20–4–2 neural network (ReLU hidden layer, two-class softmax output, 94 trainable parameters) was trained with the Adagrad optimiser using cross-entropy loss, which for a two-class softmax with one-hot targets is mathematically equivalent to a single-sigmoid binary classifier. Performance was benchmarked against reference classifiers and reported with imbalance-robust metrics and 95% confidence intervals. Research Limitation: The results are simulation-bound: they were obtained on data from an emulated test rig using a sample-level hold-out split, and have not yet been validated on physical or operational network data. Scenario-aware cross-validation, comparison with hydraulic and classical machine-learning baselines, probability calibration, and broadening of variables such as temperature and total dissolved solids (TDS) are required before field deployment. Findings: On the hold-out set, the model achieved an accuracy of 91.0% (95% CI 83.8–95.2%), precision of 90.6%, recall of 95.1%, F1-measure of 92.8%, specificity of 84.6% and a Matthews correlation coefficient (MCC) of 0.81, compared with an F1-measure of 75.8% and an MCC of 0 for a majority-class reference classifier. The false-alarm rate of 15.4% identifies specificity as the main target for improvement. Practical Implication: The proposed IoT-SCADA-AI pipeline offers transportation network operators an accessible route to early leak detection, reducing resource losses and unplanned maintenance costs. Social Implication: Reliable, low-cost leak detection supports reduction of non-revenue water in urban fluid supply networks and contributes to sustainable resource management. Originality/Value: The paper offers a lightweight (94-parameter), computationally efficient alternative to the CNN/LSTM-based leak detection approaches common in the literature, achieved by coupling a customised multiple-model hydraulic representation and PLC/SCADA data acquisition with a shallow neural classifier suitable for edge deployment.
Authors
- K. L. Bhoite
- S. M. Bhosle
- A. M. Deshmukh
Publication Details
- Journal
- African Journal Of Applied Research
- Published
- 2026-11-18
- DOI
- https://doi.org/10.26437/fhpx4k05
- Primary Topic
- Water Systems and Optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00