Influence of Ar, N2, and O2 Plasma Treatments on Electroless-Plated Au Passivation for Low-Temperature Cu–Cu Bonding

Low-temperature Cu–Cu bonding is essential for high-density three-dimensional integration because excessive thermal budgets can cause wafer warpage, bonding misalignment, and back-end-of-line reliability issues. In this study, Ar, N2, and O2 plasma treatments were applied for 10 and 30 s to Cu surfaces passivated with an approximately 7 nm-thick electroless-plated Au nanolayer. The effects on surface composition and roughness were evaluated using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), followed by Cu–Cu bonding at 200 °C and 15 MPa. Bonded interfaces and mechanical strength were examined using transmission electron microscopy (TEM) and die shear testing. All plasma treatments reduced surface carbon contamination. Ar treatment decreased the near-surface Au signal and increased the Cu signal, without uniquely establishing Au-layer thinning. N2 treatment exhibited low surface oxygen, whereas O2 treatment produced greater oxygen-related XPS signals. After 30 s, roughness increased in the order N2 (6.463 nm) < O2 (8.484 nm) < Ar (10.14 nm). Mean shear strengths among successfully bonded specimens were 16.21, 15.90, and 10.56 MPa, respectively, while specimen-level bonding success rates were 75% (15/20), 35% (7/20), and 50% (10/20), respectively. Under the investigated, non-identical plasma processing conditions, N2 yielded the lowest measured roughness and the highest observed bonding success rate.

Authors

Institutions

Publication Details

Journal
Applied Sciences
Published
2026-11-18
DOI
https://doi.org/10.3390/app162211420
Primary Topic
3D IC and TSV technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Influence of Ar, N2, and O2 Plasma Treatments on Electroless-Plated Au Passivation for Low-Temperature Cu–Cu Bonding

Sarah Eunkyung Kim, Seul Ki Hong, Seongwoo Lim, Byeongchan Go
3 links
Applied Sciences
3D IC and TSV technologies
article

Influence of Ar, N2, and O2 Plasma Treatments on Electroless-Plated Au Passivation for Low-Temperature Cu–Cu Bonding

Sarah Eunkyung Kim, Seul Ki Hong, Seongwoo Lim, Byeongchan Go
article en

Abstract

Low-temperature Cu–Cu bonding is essential for high-density three-dimensional integration because excessive thermal budgets can cause wafer warpage, bonding misalignment, and back-end-of-line reliability issues. In this study, Ar, N2, and O2 plasma treatments were applied for 10 and 30 s to Cu surfaces passivated with an approximately 7 nm-thick electroless-plated Au nanolayer. The effects on surface composition and roughness were evaluated using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), followed by Cu–Cu bonding at 200 °C and 15 MPa. Bonded interfaces and mechanical strength were examined using transmission electron microscopy (TEM) and die shear testing. All plasma treatments reduced surface carbon contamination. Ar treatment decreased the near-surface Au signal and increased the Cu signal, without uniquely establishing Au-layer thinning. N2 treatment exhibited low surface oxygen, whereas O2 treatment produced greater oxygen-related XPS signals. After 30 s, roughness increased in the order N2 (6.463 nm) < O2 (8.484 nm) < Ar (10.14 nm). Mean shear strengths among successfully bonded specimens were 16.21, 15.90, and 10.56 MPa, respectively, while specimen-level bonding success rates were 75% (15/20), 35% (7/20), and 50% (10/20), respectively. Under the investigated, non-identical plasma processing conditions, N2 yielded the lowest measured roughness and the highest observed bonding success rate.

Applied SciencesVol. 16(22)
Seoul National University of Science and Technology (KR)
Ministry of Trade, Industry and Energy, National Research Foundation of Korea
3D IC and TSV technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon