Preparation of a Zinc-Ion Hybrid Supercapacitor Based on O, N, P-Doped Carbon Monolith Derived from Wood
A zinc-ion hybrid supercapacitor utilizing a carbon monolith electrode derived from discarded basswood is presented. Basswood slices are first pretreated with phytic acid and a cobalt salt, followed by carbonization to obtain a phosphorus-doped carbon monolith (FW-PA-12@CNT). A composite carbon material featuring cobalt- and nitrogen-doped carbon nanotubes (Co-N-CNTs) embedded in the carbonaceous macroporous framework is subsequently synthesized. After poly(vinyl) alcohol softening treatment, a conductive polymer layer of poly(3,4-ethylenedioxythiophene) is electrodeposited onto the substrate surface, which results in a flexible self-supporting porous carbon composite material, with a BET specific surface area of 164.77 m2 g–1 (denoted as FW-PA-12@PCNT). In a 2 mol L–1 ZnSO4 electrolyte, when FW-PA-12@PCNT is employed as the cathode and Zn foil as the anode at a current density of 1 mA cm–2, a specific capacitance of 16218.1 mF cm–2 is achieved, with 90.4% capacitance retention maintained after 10,000 cycles of charge/discharge (15 mA cm–2). Using a 2 mol L–1 ZnSO4-polyacrylamide gel electrolyte, a solid-state device (Zn//FW-PA-12@PCNT) is assembled without any current collectors. At a current density of 1 mA cm–2, a specific capacitance of 6030 mF cm–2 (301.5 F g–1) is obtained, delivering an energy density of 2.144 mWh cm–2 (107.2 Wh kg–1) at a power density of 0.8 mW cm–2.
Authors
- Xunan Yang (ORCID: https://orcid.org/0000-0003-1390-3033)
- Yan Lu (ORCID: https://orcid.org/0000-0001-8942-2207)
- Yiqiong Lu
- Chengjia Yang
- Jianyu Guo
Institutions
- Shanghai Normal University (CN)
- Shanghai Institute of Technology (CN)
Publication Details
- Journal
- ACS Applied Energy Materials
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1021/acsaem.6c02292
- Primary Topic
- Supercapacitor Materials and Fabrication
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Shanghai Institute of Technology