Stage-resolved PM 2.5 , PM 10 , and VOC concentrations during field-simulated ski waxing and tuning: A pilot study with an exploratory worker survey

Ski waxing can generate airborne particulate matter (PM) and volatile organic compounds (VOCs), yet stage-specific and time-resolved data for modern wax products remain limited. This two-phase pilot study combined an exploratory survey of ski industry workers with a field-simulated assessment of PM and VOC concentrations during ski waxing and tuning. Among 50 survey respondents, 69.2% of those with known wax type reported current use of fluorocarbon-containing wax, and only 8% reported access to an effective dedicated exhaust system. A low-cost optical PM sensor and a PID were used to measure PM2.5, PM10, and total VOC responses. Three block wax types and four waxing stages were evaluated. Because each product was tested only at its manufacturer-recommended ironing temperature, wax type and temperature could not be separated. PM concentrations varied by stage and tested wax-temperature condition. Application produced the highest PM2.5 and PM10 concentrations, with run-level means of approximately 456 to 771 µg/m³ and 602 to 1,045 µg/m³, respectively. Brushing and scraping generated intermediate concentrations, while ironing produced elevated PM only for the fluorinated race wax. VOC patterns differed from PM, while ironing produced elevated PM only under the Wax 3–160 °C condition. Tuning generated much lower PM concentrations than waxing. These findings provide stage-resolved, time-resolved near-field concentration data to inform future personal exposure assessment and evaluation of control strategies in ski service environments.

Authors

Institutions

Publication Details

Journal
Journal of Occupational and Environmental Hygiene
Published
2026-11-18
DOI
https://doi.org/10.1080/15459624.2026.2737099
Primary Topic
Occupational Health and Safety in Workplaces
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Stage-resolved PM 2.5 , PM 10 , and VOC concentrations during field-simulated ski waxing and tuning: A pilot study with an exploratory worker survey

Darrah K. Sleeth, Runcheng Fang
Journal of Occupational and Environmental Hygiene
Occupational Health and Safety in Workplaces
article

Stage-resolved PM 2.5 , PM 10 , and VOC concentrations during field-simulated ski waxing and tuning: A pilot study with an exploratory worker survey

Darrah K. Sleeth, Runcheng Fang
article en

Abstract

Ski waxing can generate airborne particulate matter (PM) and volatile organic compounds (VOCs), yet stage-specific and time-resolved data for modern wax products remain limited. This two-phase pilot study combined an exploratory survey of ski industry workers with a field-simulated assessment of PM and VOC concentrations during ski waxing and tuning. Among 50 survey respondents, 69.2% of those with known wax type reported current use of fluorocarbon-containing wax, and only 8% reported access to an effective dedicated exhaust system. A low-cost optical PM sensor and a PID were used to measure PM2.5, PM10, and total VOC responses. Three block wax types and four waxing stages were evaluated. Because each product was tested only at its manufacturer-recommended ironing temperature, wax type and temperature could not be separated. PM concentrations varied by stage and tested wax-temperature condition. Application produced the highest PM2.5 and PM10 concentrations, with run-level means of approximately 456 to 771 µg/m³ and 602 to 1,045 µg/m³, respectively. Brushing and scraping generated intermediate concentrations, while ironing produced elevated PM only for the fluorinated race wax. VOC patterns differed from PM, while ironing produced elevated PM only under the Wax 3–160 °C condition. Tuning generated much lower PM concentrations than waxing. These findings provide stage-resolved, time-resolved near-field concentration data to inform future personal exposure assessment and evaluation of control strategies in ski service environments.

Journal of Occupational and Environmental Hygiene
University of Utah (US)
National Institute for Occupational Safety and Health
Good health and well-being
Occupational Health and Safety in Workplaces
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon