Thermally induced graphitization of organic aerosol particles

Thermal processing is widely employed in aerosol research to investigate volatility, gas-particle partitioning, and chemical composition of organic aerosol (OA). However, heating can induce chemical transformations that complicate interpretation of evaporation-based measurements. Here, the formation of graphitic-like material during thermal treatment of OA particles was investigated using heated transmission electron microscopy (TEM) and carbon K-edge X-ray spectromicroscopy. Organic particles representative of urban emissions from cured-in-place pipe (CIPP) technology were analyzed by heated TEM to quantify particle shrinkage at temperatures up to ∼400 °C. Their thermal evolution was compared with literature-reported X-ray absorption spectra of other atmospherically relevant particles, including airborne soil organic particles, Suwanee River fulvic acid particles, tar balls, and toluene-derived secondary organic aerosol. CIPP-derived particles exhibited two-stage volume reduction, with rapid shrinkage from room temperature to 100 °C and a second pronounced decrease above 300 °C. X-ray absorption spectra revealed systematic increases in the π*C = C (285.4 eV) and σ*GL (307.0 eV) transitions during heating, indicating progressive formation of graphitic-like structures. Across all particle types, graphitization became significant above ∼300 °C, demonstrating that thermal treatment can fundamentally alter OA composition and structure. Consequently, aerosol characterization techniques that expose particles to temperatures approaching or exceeding ∼300 °C may underestimate semi-volatile organic material and overestimate the abundance of soot or graphitic-like components with enhanced light-absorbing properties. Thermally induced graphitization should therefore be considered when interpreting volatility, composition, and optical-property measurements derived from heating-based analyzers.Copyright © 2026 American Association for Aerosol Research

Authors

Institutions

Publication Details

Journal
Aerosol Science and Technology
Published
2026-11-18
DOI
https://doi.org/10.1080/02786826.2026.2759833
Primary Topic
Atmospheric chemistry and aerosols
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Thermally induced graphitization of organic aerosol particles

Zezhen Cheng, Steven Sharpe, Alexander Laskin, Swarup China et al.
Aerosol Science and Technology
Atmospheric chemistry and aerosols
article

Thermally induced graphitization of organic aerosol particles

Zezhen Cheng, Steven Sharpe, Alexander Laskin, Swarup China, Libor Kovařík, Temitope E. Olayemi, Julius Iruoghene Ese
article en

Abstract

Thermal processing is widely employed in aerosol research to investigate volatility, gas-particle partitioning, and chemical composition of organic aerosol (OA). However, heating can induce chemical transformations that complicate interpretation of evaporation-based measurements. Here, the formation of graphitic-like material during thermal treatment of OA particles was investigated using heated transmission electron microscopy (TEM) and carbon K-edge X-ray spectromicroscopy. Organic particles representative of urban emissions from cured-in-place pipe (CIPP) technology were analyzed by heated TEM to quantify particle shrinkage at temperatures up to ∼400 °C. Their thermal evolution was compared with literature-reported X-ray absorption spectra of other atmospherically relevant particles, including airborne soil organic particles, Suwanee River fulvic acid particles, tar balls, and toluene-derived secondary organic aerosol. CIPP-derived particles exhibited two-stage volume reduction, with rapid shrinkage from room temperature to 100 °C and a second pronounced decrease above 300 °C. X-ray absorption spectra revealed systematic increases in the π*C = C (285.4 eV) and σ*GL (307.0 eV) transitions during heating, indicating progressive formation of graphitic-like structures. Across all particle types, graphitization became significant above ∼300 °C, demonstrating that thermal treatment can fundamentally alter OA composition and structure. Consequently, aerosol characterization techniques that expose particles to temperatures approaching or exceeding ∼300 °C may underestimate semi-volatile organic material and overestimate the abundance of soot or graphitic-like components with enhanced light-absorbing properties. Thermally induced graphitization should therefore be considered when interpreting volatility, composition, and optical-property measurements derived from heating-based analyzers.Copyright © 2026 American Association for Aerosol Research

Aerosol Science and Technology
Pacific Northwest National Laboratory (US), Purdue University West Lafayette (US), Environmental Molecular Sciences Laboratory (US)
U.S. Department of Energy, Purdue University, Office of Science, Biological and Environmental Research, Pacific Northwest National Laboratory
Atmospheric chemistry and aerosols
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon