Printing powerful soft robots on a desktop
Soft robots can achieve complex behaviors with simple control strategies. One promising approach is to embed fluidic control circuits directly into the structure of a soft robot without electronics. Automated additive manufacturing offers a route to consistently fabricate such integrated robotic systems without labor-intensive manual assembly. However, previous soft robots fabricated using this approach relied on control circuits that operated at low power, limiting their practical utility. Here, we present a 3D-printed high-power pneumatic architecture for driving soft robots. At its core is a double-expansion pneumatic oscillator inspired by the compound steam engine that converts a constant high-pressure gas input into four-phase pressure signals at high frequency. We demonstrate its use in a monolithically 3D-printed hexapod running robot capable of reaching a top speed of 4.72 meters per second with an estimated mechanical power output of 169 watts, exhibiting high-speed locomotion in a fully soft robotic system. The robot traversed rough outdoor terrain and aquatic environments and could also be operated with a liquid working medium, tap water, representing a key advance toward digitally fabricated soft robots with high performance for accomplishing real-world tasks.
Authors
- Michael Thomas Tolley (ORCID: https://orcid.org/0000-0001-7821-7777)
- Yichen Zhai (ORCID: https://orcid.org/0000-0001-6174-7421)
Institutions
- University of California San Diego (US)
Publication Details
- Journal
- Science Robotics
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1126/scirobotics.aei1264
- Primary Topic
- Soft Robotics and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Science Foundation