Self‐Healing Gel Polymer Electrolytes Enabled by Diels–Alder Chemistry for High‐Performance Lithium Metal Batteries
ABSTRACT Gel polymer electrolytes (GPEs), consisting of a polymer host swollen with liquid electrolyte, are being employed to address the safety concerns. This study presents a series of Diels–Alder (DA) GPEs for lithium (Li) metal batteries. A furan‐functional poly(ether–ester) precursor is crosslinked with a flexible bismaleimide‐terminated polyether and a rigid aromatic bismaleimide through a thermoreversible DA reaction. Their thermal properties, electrolyte uptake, ion‐transport behavior, and electrochemical performance can be systematically regulated by changing the aromatic bismaleimide content. DA‐BMI‐10 exhibits the highest ionic conductivity of 3.53 mS cm −1 , and the corresponding LiFePO 4 ||Li cells demonstrate rate capability up to 2 C. Impressively, after mechanical damage followed by thermal healing, the DA‐BMI‐10 GPE exhibits substantial ionic‐conductivity recovery with a self‐healing efficiency of 95.0%. The healed LiFePO 4 ||Li cells retain 99.5% of the discharge capacity of the pristine GPE cells after 10 cycles at 0.2 C. These results highlight crosslink‐density regulation of DA‐based dynamic networks as an effective strategy for developing GPEs that integrate efficient ion transport, stable electrode/electrolyte interfaces, and functional recovery.
Authors
- Xiulian Qin (ORCID: https://orcid.org/0009-0006-6237-2573)
Institutions
- Tsinghua University (CN)
Publication Details
- Journal
- Journal of Applied Polymer Science
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1002/app.71811
- Primary Topic
- Advanced Battery Materials and Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00