Reaction-Dependent Performance of Ni/CeO2-Al2O3 Synthesis Routes for Ethanol Reforming Reactions

The preparation method of mixed oxide supports is a key factor governing the physicochemical properties and catalytic performance of Ni-based reforming catalysts. In this study, Ni catalysts supported on mixed Al2O3–CeO2 oxides prepared by mechanochemical synthesis and co-precipitation were comparatively investigated in ethanol dry reforming (EDR) and ethanol steam reforming (ESR). Although the catalysts possessed the same nominal composition, the preparation route resulted in markedly different Ni dispersions, metal–support interactions, and oxygen vacancy formation ability, leading to distinct catalytic behavior under the two ethanol reforming environments. The catalyst derived from the co-precipitated support (Ni/AC-c) exhibited enhanced CO2 adsorption, improved resistance to Ni sintering, and higher initial activity during EDR. Nevertheless, it underwent faster deactivation despite accumulating a smaller amount of carbon deposits. In contrast, the catalyst prepared from the mechanochemically synthesized support (Ni/AC-m) maintained catalytic activity for a longer period, despite a larger amount of carbon and noticeable Ni sintering observed. Under ESR conditions, the trends were reversed: the Ni/AC-c catalyst displayed stable performance over 7 h on stream with preserved Ni particle size, whereas the Ni/AC-m catalyst gradually deactivated due to Ni sintering and the accumulation of disordered carbon species. The catalyst preparation method altered the carbon growth pathway. Filamentous carbon or loose carbon agglomerates predominated on the Ni/AC-m catalyst, whereas the co-precipitated Ni/AC-c catalyst promoted the formation of graphitic carbon nanostructures whose morphology strongly depended on the reaction atmosphere. The combined catalytic and physicochemical characterization results demonstrate that catalyst stability is governed by the interplay between support properties, metal–support interactions, carbon evolution, and the elementary reaction mechanism rather than by the amount of deposited carbon alone. The present study highlights that the influence of the preparation method on catalyst structure and stability is intrinsically reaction-dependent and should therefore be evaluated under the specific reforming conditions for which the catalyst is intended.

Authors

Institutions

Publication Details

Journal
Energy & Fuels
Published
2026-11-19
DOI
https://doi.org/10.1021/acs.energyfuels.6c03739
Primary Topic
Catalysts for Methane Reforming
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Reaction-Dependent Performance of Ni/CeO2-Al2O3 Synthesis Routes for Ethanol Reforming Reactions

Konstantin Igorevich Maslakov, Oksana Ya. Isaikina, Serguei V. Savilov, Муштаков Антон Георгиевич et al.
1 links
Energy & Fuels
Catalysts for Methane Reforming
article

Reaction-Dependent Performance of Ni/CeO2-Al2O3 Synthesis Routes for Ethanol Reforming Reactions

Konstantin Igorevich Maslakov, Oksana Ya. Isaikina, Serguei V. Savilov, Муштаков Антон Георгиевич, Yuri A. Fionov, Anna I. Zhukova, S Semenova, Anna Sorokina, Daria Kolimeeva, Natalia Ignatieva
article en

Abstract

The preparation method of mixed oxide supports is a key factor governing the physicochemical properties and catalytic performance of Ni-based reforming catalysts. In this study, Ni catalysts supported on mixed Al2O3–CeO2 oxides prepared by mechanochemical synthesis and co-precipitation were comparatively investigated in ethanol dry reforming (EDR) and ethanol steam reforming (ESR). Although the catalysts possessed the same nominal composition, the preparation route resulted in markedly different Ni dispersions, metal–support interactions, and oxygen vacancy formation ability, leading to distinct catalytic behavior under the two ethanol reforming environments. The catalyst derived from the co-precipitated support (Ni/AC-c) exhibited enhanced CO2 adsorption, improved resistance to Ni sintering, and higher initial activity during EDR. Nevertheless, it underwent faster deactivation despite accumulating a smaller amount of carbon deposits. In contrast, the catalyst prepared from the mechanochemically synthesized support (Ni/AC-m) maintained catalytic activity for a longer period, despite a larger amount of carbon and noticeable Ni sintering observed. Under ESR conditions, the trends were reversed: the Ni/AC-c catalyst displayed stable performance over 7 h on stream with preserved Ni particle size, whereas the Ni/AC-m catalyst gradually deactivated due to Ni sintering and the accumulation of disordered carbon species. The catalyst preparation method altered the carbon growth pathway. Filamentous carbon or loose carbon agglomerates predominated on the Ni/AC-m catalyst, whereas the co-precipitated Ni/AC-c catalyst promoted the formation of graphitic carbon nanostructures whose morphology strongly depended on the reaction atmosphere. The combined catalytic and physicochemical characterization results demonstrate that catalyst stability is governed by the interplay between support properties, metal–support interactions, carbon evolution, and the elementary reaction mechanism rather than by the amount of deposited carbon alone. The present study highlights that the influence of the preparation method on catalyst structure and stability is intrinsically reaction-dependent and should therefore be evaluated under the specific reforming conditions for which the catalyst is intended.

Energy & Fuels
Peoples' Friendship University of Russia (RU), Lomonosov Moscow State University (RU), A.V. Topchiev Institute of Petrochemical Synthesis (RU), MIREA - Russian Technological University (RU)
Affordable and clean energy
Catalysts for Methane Reforming
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon