Evaluation of the sensing behavior of PLA-based composites reinforced with NiTi wires during cyclic loading
A large number of research focuses primarily on establishing relationships between the mechanical and electrical properties of NiTi alloys due to their unique properties exploited in “self-sensing” actuators. In addition, numerous research examines NiTi-based active composites. These works provide extensive knowledge regarding the requirements and design challenges associated with this type of composite. Although active composites and resistive models used in “self-sensing” actuators are well described in the literature, it is difficult to find studies that apply analogous NiTi alloy properties in sensing systems, especially those intended for structural health monitoring. The purpose of this article was to evaluate the possibility of using NiTi alloys in PLA-based composite sensor systems. In this paper, the operation of a specific sensor system inside a polymer composite reinforced with NiTi wire was investigated. The developed samples were subjected to cyclic loading using the author’s test stand designed to investigate the electromechanical properties of NiTi alloy wires. The tests demonstrated a correlation between successive load cycles and the electrical resistance of the NiTi alloy wire embedded inside the polymer matrix. The article also demonstrated that it is possible to fabricate NiTi-based sensors systems using additive manufacturing techniques and commonly available filaments, which significantly reduces costs and shortens the production process. In addition, it was demonstrated that the numerically supported design of sensor systems, allowing for the creation of “tailor-made” solutions that can be adapted to applications with specific requirements.
Authors
- Sebastian Sławski (ORCID: https://orcid.org/0000-0001-8078-7787)
- Milan Vaško (ORCID: https://orcid.org/0000-0003-3585-2572)
- Jonasz Hartwich (ORCID: https://orcid.org/0000-0003-3318-3897)
- Sławomir Duda (ORCID: https://orcid.org/0000-0002-8120-0201)
Institutions
- Silesian University of Technology (PL)
- University of Žilina (SK)
Publication Details
- Journal
- The International Journal of Advanced Manufacturing Technology
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1007/s00170-026-19563-8
- Primary Topic
- Smart Materials for Construction
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Silesian University of Technology