Material-based H2 and CO2 storage in nanoporous carbons: Structure-performance relationships and cost considerations

This study addresses the critical challenge of efficient hydrogen (H2) and carbon dioxide (CO2) storage by investigating 16 commercially available nanoporous carbons with Brunauer-Emmett-Teller (BET) surface areas ranging from ≈ 560 m2/g to 3380 m2/g. The purpose of the study was to correlate textural properties, particularly micropore surface area and volume, with low-pressure (0-1 bar) gas uptake performance, thereby providing a comparative basis for screening adsorbents relevant to H2 storage and CO2 capture. Structural investigations were performed via X-ray diffraction and Raman spectroscopy. The textural properties of nanoporous carbons derived from various precursor materials (coconut, organic, and petroleum) were systematically characterized using N2 adsorption at 77 K and CO2 adsorption at 273 K. Additionally, H2 adsorption studies at 77 K and up to 1 bar were performed. The results revealed that gravimetric H2 uptake at 77 K and 1 bar strongly correlates with micropore surface area and micropore volume, with petroleum-derived super-activated carbons achieving uptakes up to 2.74 wt.%. However, coconut-derived materials exhibited higher calculated volumetric H2 uptake under an idealized material-volume normalization, reaching up to 18.12 g/L. In contrast, CO2 uptake at 273 K demonstrated a weaker dependence on these textural parameters, suggesting that additional factors such as the sub-critical behavior of CO2 at this temperature are influential. A techno-economic analysis further indicated that, despite their moderate adsorption capacities, coconut-derived nanoporous carbons offer a favorable combination of low-pressure adsorption performance and quoted adsorbent cost compared to their petroleum-derived and organic precursor-derived counterparts.

Authors

Institutions

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-18
DOI
https://doi.org/10.5281/zenodo.24338963
Primary Topic
Hydrogen Storage and Materials
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Material-based H2 and CO2 storage in nanoporous carbons: Structure-performance relationships and cost considerations

Christian Mitterer, Stefan Zeiler, Nikolaos Kostoglou, Verena Maier‐Kiener
1 links
Zenodo (CERN European Organization for Nuclear Research)
Hydrogen Storage and Materials
preprint

Material-based H2 and CO2 storage in nanoporous carbons: Structure-performance relationships and cost considerations

Christian Mitterer, Stefan Zeiler, Nikolaos Kostoglou, Verena Maier‐Kiener
preprint en

Abstract

This study addresses the critical challenge of efficient hydrogen (H2) and carbon dioxide (CO2) storage by investigating 16 commercially available nanoporous carbons with Brunauer-Emmett-Teller (BET) surface areas ranging from ≈ 560 m2/g to 3380 m2/g. The purpose of the study was to correlate textural properties, particularly micropore surface area and volume, with low-pressure (0-1 bar) gas uptake performance, thereby providing a comparative basis for screening adsorbents relevant to H2 storage and CO2 capture. Structural investigations were performed via X-ray diffraction and Raman spectroscopy. The textural properties of nanoporous carbons derived from various precursor materials (coconut, organic, and petroleum) were systematically characterized using N2 adsorption at 77 K and CO2 adsorption at 273 K. Additionally, H2 adsorption studies at 77 K and up to 1 bar were performed. The results revealed that gravimetric H2 uptake at 77 K and 1 bar strongly correlates with micropore surface area and micropore volume, with petroleum-derived super-activated carbons achieving uptakes up to 2.74 wt.%. However, coconut-derived materials exhibited higher calculated volumetric H2 uptake under an idealized material-volume normalization, reaching up to 18.12 g/L. In contrast, CO2 uptake at 273 K demonstrated a weaker dependence on these textural parameters, suggesting that additional factors such as the sub-critical behavior of CO2 at this temperature are influential. A techno-economic analysis further indicated that, despite their moderate adsorption capacities, coconut-derived nanoporous carbons offer a favorable combination of low-pressure adsorption performance and quoted adsorbent cost compared to their petroleum-derived and organic precursor-derived counterparts.

Zenodo (CERN European Organization for Nuclear Research)
Montanuniversität Leoben (AT)
Climate action, Affordable and clean energy
Hydrogen Storage and Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon