Lightweight Aircraft Battery Enclosures Made From 3-D Printed Continuous Fiber-Reinforced Composites

Advanced electric and hybrid-electric aircraft require battery enclosures that are both lightweight and structurally reliable. Continuous fiber-reinforced composites produced via additive manufacturing (AM) offer an effective solution by enabling tailored fiber architectures and reduced mass compared to traditional metallic housings. Continuous fiberglass reinforced (CFGR) composites were fabricated using fused filament fabrication and evaluated under tension, compression, and flexural loading to quantify mechanical performance. A full-scale, 12-inch-long battery enclosure was simulated, optimized, fabricated, and subjected to 100 h of cyclic cantilever bending to assess durability under representative service conditions. Results indicate that fiber orientation and architecture strongly influence mechanical response, with on-edge and concentric configurations exhibiting the highest strength and stiffness. The enclosure sustained repeated deflections of up to 7.65 mm without permanent deformation or cracking, confirming its suitability for installation in aircraft wing structures. These findings demonstrate the potential of continuous fiber AM to produce lightweight, structurally robust battery enclosures and establish a framework for integrating simulation-guided design with mechanical testing.

Authors

Institutions

Publication Details

Journal
Batteries
Published
2026-11-18
DOI
https://doi.org/10.3390/batteries12110497
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Lightweight Aircraft Battery Enclosures Made From 3-D Printed Continuous Fiber-Reinforced Composites

Amjad S. Almansour, Meelad Ranaiefar, Mrityunjay Singh
4 links
Batteries
Additive Manufacturing and 3D Printing Technologies
article

Lightweight Aircraft Battery Enclosures Made From 3-D Printed Continuous Fiber-Reinforced Composites

Amjad S. Almansour, Meelad Ranaiefar, Mrityunjay Singh
article en

Abstract

Advanced electric and hybrid-electric aircraft require battery enclosures that are both lightweight and structurally reliable. Continuous fiber-reinforced composites produced via additive manufacturing (AM) offer an effective solution by enabling tailored fiber architectures and reduced mass compared to traditional metallic housings. Continuous fiberglass reinforced (CFGR) composites were fabricated using fused filament fabrication and evaluated under tension, compression, and flexural loading to quantify mechanical performance. A full-scale, 12-inch-long battery enclosure was simulated, optimized, fabricated, and subjected to 100 h of cyclic cantilever bending to assess durability under representative service conditions. Results indicate that fiber orientation and architecture strongly influence mechanical response, with on-edge and concentric configurations exhibiting the highest strength and stiffness. The enclosure sustained repeated deflections of up to 7.65 mm without permanent deformation or cracking, confirming its suitability for installation in aircraft wing structures. These findings demonstrate the potential of continuous fiber AM to produce lightweight, structurally robust battery enclosures and establish a framework for integrating simulation-guided design with mechanical testing.

BatteriesVol. 12(11)
Glenn Research Center (US), Ohio Aerospace Institute (US)
Industry, innovation and infrastructure, Affordable and clean energy
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon