The Sustainability Gap in Biomimetics: Performance-DrivenDesign Versus Material Circularity

Biomimetic performance does not necessarily imply material sustainability, because biological functions can be reproduced without adopting the material logic that enables resource efficiency, repair, and material cycling in natural systems. This mismatch reflects a broader sustainability challenge in which the transition toward carbon-neutral technologies has prioritised CO2 reduction while the depletion of non-renewable primary resources and accumulation of non-recyclable synthetic materials remain equally pressing. Although biomimetic design draws inspiration from biological systems associated with resource efficiency, repair, and material cycling, many technical implementations rely on thermoset polymers, epoxy-based composites, fluorinated coatings, or hybrid nanostructures with few end-of-life options. This mismatch is especially critical in nanoscale coatings, multilayered surfaces, and hybrid interfaces, where performance depends on material combinations that are difficult to separate. This review examines the sustainability gap in biomimetics between performance-driven design and material circularity, and argues for moving beyond carbon-centred assessment toward life-cycle-based material evaluation. Through selected examples spanning bio-derived polymers, silicates, engineered living materials, and biohybrid interfaces, we identify opportunities and limitations of current strategies. We discuss bio-derived polymers, including chitosan, collagen, gelatin, and keratin, as platforms connecting biological function with milder processing, interfacial control, and controlled degradation. Obtained from renewable or waste biomass streams, they reduce dependence on fossil-based materials. Combined with surface engineering such as laser patterning, biomimetic mineralisation, or controlled cross-linking, these materials can support wetting control, adhesion modulation, bioactivity, and optical response. However, these benefits depend on balancing operational stability against end-of-life degradation. Biomimetic design should therefore move beyond imitating biological form or function and incorporate the material logic of biological systems: hierarchical organisation, reversible interactions, repair, and controlled reintegration into material cycles. Two gaps constrain evidence-based material selection: life-cycle assessment data specific to biomimetic implementations remain scarce, and the reviewed platforms differ considerably in industrial readiness. We propose regenerative biomimetics as a material-level design framework in which biological function, material origin, processing, operational stability, and end-of-life behaviour are considered together, addressing resource depletion alongside carbon emissions.

Authors

Institutions

Publication Details

Journal
Bioinspiration & Biomimetics
Published
2026-11-18
DOI
https://doi.org/10.1088/1748-3190/aec3fd
Primary Topic
Sustainable Design and Development
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

The Sustainability Gap in Biomimetics: Performance-DrivenDesign Versus Material Circularity

Markus Valtiner, Daniela Miano, Ille C. Gebeshuber, Richard W. van Nieuwenhoven et al.
Bioinspiration & Biomimetics
Sustainable Design and Development
article

The Sustainability Gap in Biomimetics: Performance-DrivenDesign Versus Material Circularity

Markus Valtiner, Daniela Miano, Ille C. Gebeshuber, Richard W. van Nieuwenhoven, Astrid Albrecht-Kramreiter
article en

Abstract

Biomimetic performance does not necessarily imply material sustainability, because biological functions can be reproduced without adopting the material logic that enables resource efficiency, repair, and material cycling in natural systems. This mismatch reflects a broader sustainability challenge in which the transition toward carbon-neutral technologies has prioritised CO2 reduction while the depletion of non-renewable primary resources and accumulation of non-recyclable synthetic materials remain equally pressing. Although biomimetic design draws inspiration from biological systems associated with resource efficiency, repair, and material cycling, many technical implementations rely on thermoset polymers, epoxy-based composites, fluorinated coatings, or hybrid nanostructures with few end-of-life options. This mismatch is especially critical in nanoscale coatings, multilayered surfaces, and hybrid interfaces, where performance depends on material combinations that are difficult to separate. This review examines the sustainability gap in biomimetics between performance-driven design and material circularity, and argues for moving beyond carbon-centred assessment toward life-cycle-based material evaluation. Through selected examples spanning bio-derived polymers, silicates, engineered living materials, and biohybrid interfaces, we identify opportunities and limitations of current strategies. We discuss bio-derived polymers, including chitosan, collagen, gelatin, and keratin, as platforms connecting biological function with milder processing, interfacial control, and controlled degradation. Obtained from renewable or waste biomass streams, they reduce dependence on fossil-based materials. Combined with surface engineering such as laser patterning, biomimetic mineralisation, or controlled cross-linking, these materials can support wetting control, adhesion modulation, bioactivity, and optical response. However, these benefits depend on balancing operational stability against end-of-life degradation. Biomimetic design should therefore move beyond imitating biological form or function and incorporate the material logic of biological systems: hierarchical organisation, reversible interactions, repair, and controlled reintegration into material cycles. Two gaps constrain evidence-based material selection: life-cycle assessment data specific to biomimetic implementations remain scarce, and the reviewed platforms differ considerably in industrial readiness. We propose regenerative biomimetics as a material-level design framework in which biological function, material origin, processing, operational stability, and end-of-life behaviour are considered together, addressing resource depletion alongside carbon emissions.

Bioinspiration & Biomimetics
TU Wien (AT)
Österreichische Forschungsförderungsgesellschaft, Technische Universität Wien Bibliothek
Responsible consumption and production
Sustainable Design and Development
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon