Engineering, Thermodynamic, and Techno-Economic Feasibility of a 1 t/h Continuous Cryogenic-Ozone (K-O) PET Depolymerization Facility for Virgin-Grade PTA and MEG Recovery

REVISION NOTICE (VERSION 2): In the interest of technical rigor and engineering transparency, Version 2 corrects three thermodynamic and chemical-process inconsistencies identified during the post-publication audit of Version 1: (1) in Section 6.2, the cryogenic heavy-fermion compound YbRh2Si2 (which exhibits quantum-critical thermal rectification only below 1 K and is economically unfeasible for industrial vessels) is replaced by standard industrial fluoropolymer (PTFE/PFA) and borosilicate glass-lined reactor interiors equipped with external ASME-compliant half-pipe coil cooling jackets, while Section 6.1 is reformulated strictly in terms of Fourier thermal-barrier resistance; (2) in Section 7.1, the HVAC heat-recovery calculation is corrected to avoid double-counting the 199 kJ/kg latent heat of vaporization of liquid nitrogen (55.28 kW, which is consumed inside the cryogenic pin mill) and instead evaluates the sensible enthalpy recovery of cold nitrogen off-gas warming from -100 C to +20 C (Delta T = 120 K, cp = 1.04 kJ/kg*K), yielding 34.7 kW or 24,960 kWh_th/month; and (3) in Section 7.3, the water mass balance is corrected to reflect that hydrolytic cleavage of 1,000 kg/h of PET into 864.5 kg/h of PTA and 323.0 kg/h of MEG stoichiometrically consumes 187.5 kg/h (187.5 L/h) of water rather than generating 375 L/h as a byproduct; accordingly, the water subsystem is specified as a closed-loop process-slurry filtrate reclamation circuit with a continuous 187.5 L/h demineralized makeup feed. ABSTRACT:Conventional high-temperature pyrolysis (510 C to 730 C) of oxygen-rich polyesters such as Polyethylene Terephthalate (PET) yields large fractions of non-condensable gases (38 to 49 wt%), solid char (up to 40 wt%), and sublimating aromatic acids (terephthalic acid sublimating at 402 C and benzoic acid) that desublimate inside downstream condensers and obstruct piping. This engineering case study evaluates the thermodynamic, stoichiometric, structural, and economic feasibility of a 1 t/h Continuous Cryogenic-Ozone (K-O) PET Depolymerization Facility. The process combines liquid-nitrogen cryogenic embrittlement (-100 C operating chamber temperature) and high-speed contra-rotating pin milling (<100 um particle size) with ozone-assisted aqueous slurry depolymerization (<100 C). Per 1,000 kg of PET feedstock (C10H8O4) and 187.5 kg of stoichiometric reaction water, the process recovers 864.5 kg of virgin-grade Purified Terephthalic Acid (PTA, <25 ppm 4-carboxybenzaldehyde) and 323.0 kg of Monoethylene Glycol (MEG), corresponding to a 118.75 wt% monomer mass yield relative to input polymer. The study details the thermal building envelope (150 to 200 mm closed-cell polyisocyanurate panels with 0.85-albedo TiO2 elastomeric roof coatings), dynamic C40/50 concrete foundations with Novolac epoxy chemical protection, IE5 motor (315 A) and NYCWY shielded cabling specifications, sensible N2 off-gas heat recovery (34.7 kW), and regional revenue projections ($1,096.10 USD/t gross monomer value on the US Gulf Coast).

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-18
DOI
https://doi.org/10.5281/zenodo.24339482
Primary Topic
Polymer crystallization and properties
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Engineering, Thermodynamic, and Techno-Economic Feasibility of a 1 t/h Continuous Cryogenic-Ozone (K-O) PET Depolymerization Facility for Virgin-Grade PTA and MEG Recovery

Ferenc Jordán
2 links
Zenodo (CERN European Organization for Nuclear Research)
Polymer crystallization and properties
preprint

Engineering, Thermodynamic, and Techno-Economic Feasibility of a 1 t/h Continuous Cryogenic-Ozone (K-O) PET Depolymerization Facility for Virgin-Grade PTA and MEG Recovery

Ferenc Jordán
preprint en

Abstract

REVISION NOTICE (VERSION 2): In the interest of technical rigor and engineering transparency, Version 2 corrects three thermodynamic and chemical-process inconsistencies identified during the post-publication audit of Version 1: (1) in Section 6.2, the cryogenic heavy-fermion compound YbRh2Si2 (which exhibits quantum-critical thermal rectification only below 1 K and is economically unfeasible for industrial vessels) is replaced by standard industrial fluoropolymer (PTFE/PFA) and borosilicate glass-lined reactor interiors equipped with external ASME-compliant half-pipe coil cooling jackets, while Section 6.1 is reformulated strictly in terms of Fourier thermal-barrier resistance; (2) in Section 7.1, the HVAC heat-recovery calculation is corrected to avoid double-counting the 199 kJ/kg latent heat of vaporization of liquid nitrogen (55.28 kW, which is consumed inside the cryogenic pin mill) and instead evaluates the sensible enthalpy recovery of cold nitrogen off-gas warming from -100 C to +20 C (Delta T = 120 K, cp = 1.04 kJ/kg*K), yielding 34.7 kW or 24,960 kWh_th/month; and (3) in Section 7.3, the water mass balance is corrected to reflect that hydrolytic cleavage of 1,000 kg/h of PET into 864.5 kg/h of PTA and 323.0 kg/h of MEG stoichiometrically consumes 187.5 kg/h (187.5 L/h) of water rather than generating 375 L/h as a byproduct; accordingly, the water subsystem is specified as a closed-loop process-slurry filtrate reclamation circuit with a continuous 187.5 L/h demineralized makeup feed. ABSTRACT:Conventional high-temperature pyrolysis (510 C to 730 C) of oxygen-rich polyesters such as Polyethylene Terephthalate (PET) yields large fractions of non-condensable gases (38 to 49 wt%), solid char (up to 40 wt%), and sublimating aromatic acids (terephthalic acid sublimating at 402 C and benzoic acid) that desublimate inside downstream condensers and obstruct piping. This engineering case study evaluates the thermodynamic, stoichiometric, structural, and economic feasibility of a 1 t/h Continuous Cryogenic-Ozone (K-O) PET Depolymerization Facility. The process combines liquid-nitrogen cryogenic embrittlement (-100 C operating chamber temperature) and high-speed contra-rotating pin milling (<100 um particle size) with ozone-assisted aqueous slurry depolymerization (<100 C). Per 1,000 kg of PET feedstock (C10H8O4) and 187.5 kg of stoichiometric reaction water, the process recovers 864.5 kg of virgin-grade Purified Terephthalic Acid (PTA, <25 ppm 4-carboxybenzaldehyde) and 323.0 kg of Monoethylene Glycol (MEG), corresponding to a 118.75 wt% monomer mass yield relative to input polymer. The study details the thermal building envelope (150 to 200 mm closed-cell polyisocyanurate panels with 0.85-albedo TiO2 elastomeric roof coatings), dynamic C40/50 concrete foundations with Novolac epoxy chemical protection, IE5 motor (315 A) and NYCWY shielded cabling specifications, sensible N2 off-gas heat recovery (34.7 kW), and regional revenue projections ($1,096.10 USD/t gross monomer value on the US Gulf Coast).

Zenodo (CERN European Organization for Nuclear Research)
Responsible consumption and production
Polymer crystallization and properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon