A Review of Microalloy Solubility with Consideration of Steel Processing in Austenite and Ferrite

Microalloy binary and complex particles play a fundamental role in controlling microstructures and properties throughout steelmaking processes. Their stability is described by solubility products; however, the relationships reported in the literature exhibit considerable variability among different authors and were established using different experimental and thermodynamic techniques. This review critically assesses the development and applicability of solubility products for microalloy precipitates in ferrite and austenite. More than 90 literature-reported solubility products were compiled and classified according to precipitate type, matrix phase in which they were obtained and methodology. Specific attention was directed towards NbC and TiC, to which published relationships were quantitatively compared. A regression analysis was used to derive global solubility products for ferrite and austenite. The assessment reveals considerable scatter in the reported relationships and a marked imbalance between matrix phases, with most studies focusing on austenite. Furthermore, it was also established that ferritic solubility products were obtained predominantly with thermodynamic calculations, as no experimental work has been reported in the literature. Experimental evidence under ferrite–austenite coexistence is particularly limited. Finally, industrial examples are provided to demonstrate that equilibrium solubility alone cannot describe the microalloying state developed during thermomechanical processing, where precipitation and dissolution kinetics are critical. Improved experimental validation, particularly in ferrite and the intercritical region, is therefore required to strengthen the application of solubility products to industrial steel design.

Authors

Institutions

Publication Details

Journal
Alloys
Published
2026-11-18
DOI
https://doi.org/10.3390/alloys5040034
Primary Topic
Metallurgical Processes and Thermodynamics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A Review of Microalloy Solubility with Consideration of Steel Processing in Austenite and Ferrite

Caio de Paula Camargo Pisano, Dominik Britz, Hardy Mohrbacher, Jenifer Barrirero et al.
2 links
Alloys
Metallurgical Processes and Thermodynamics
article

A Review of Microalloy Solubility with Consideration of Steel Processing in Austenite and Ferrite

Caio de Paula Camargo Pisano, Dominik Britz, Hardy Mohrbacher, Jenifer Barrirero, Frank Mücklich
article en

Abstract

Microalloy binary and complex particles play a fundamental role in controlling microstructures and properties throughout steelmaking processes. Their stability is described by solubility products; however, the relationships reported in the literature exhibit considerable variability among different authors and were established using different experimental and thermodynamic techniques. This review critically assesses the development and applicability of solubility products for microalloy precipitates in ferrite and austenite. More than 90 literature-reported solubility products were compiled and classified according to precipitate type, matrix phase in which they were obtained and methodology. Specific attention was directed towards NbC and TiC, to which published relationships were quantitatively compared. A regression analysis was used to derive global solubility products for ferrite and austenite. The assessment reveals considerable scatter in the reported relationships and a marked imbalance between matrix phases, with most studies focusing on austenite. Furthermore, it was also established that ferritic solubility products were obtained predominantly with thermodynamic calculations, as no experimental work has been reported in the literature. Experimental evidence under ferrite–austenite coexistence is particularly limited. Finally, industrial examples are provided to demonstrate that equilibrium solubility alone cannot describe the microalloying state developed during thermomechanical processing, where precipitation and dissolution kinetics are critical. Improved experimental validation, particularly in ferrite and the intercritical region, is therefore required to strengthen the application of solubility products to industrial steel design.

AlloysVol. 5(4)
Saarland University (DE), KU Leuven (BE)
Metallurgical Processes and Thermodynamics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon