Balancing of a Rigid Overhung Rotor by Two-Plane Correction Masses: Exact Solutions and Stability Analysis

The motivation of this study is to reduce the bearing loads of a short-neck rigid overhung rotor arising from two imbalance-related mechanisms: the centrifugal force caused by an offset center of mass and the precession-induced force caused by misalignment between the rotor shaft and a principal inertia axis. A wafer-cleaning holder press-fitted coaxially onto a motor shaft is considered. Because the connecting neck is very short, its elastic deformation is neglected and the assembly is modeled as a rigid overhung rotor. For a geometrically complex and mass-imbalanced rotor, the off-diagonal inertia-tensor components [Formula: see text], [Formula: see text], and [Formula: see text] may be nonzero, so the prescribed shaft axis need not coincide with a principal inertia axis and torque-free precession can occur. To obtain an exact balancing solution, a theorem-oriented formulation is derived from Euler’s rotational equations. For the prescribed initial condition [Formula: see text] and [Formula: see text], we prove that the necessary and sufficient conditions for the rotor to maintain constant-speed pure spin about its shaft are [Formula: see text] and [Formula: see text]. These conditions make the prescribed shaft axis a principal inertia axis and suppress the rigid-body precession associated with shaft–principal-axis misalignment. The additional conditions [Formula: see text] and [Formula: see text] place the combined center of mass on the shaft axis and eliminate the centrifugal-force component caused by mass imbalance. Two compensating masses are attached on two axially separated correction planes. Their two masses and two angular positions constitute four unknowns, which are determined exactly from the four balancing conditions [Formula: see text]. Numerical integration of the nonlinear Euler equations together with quaternion orientation kinematics is used to reconstruct the shaft-marker trajectory. In addition to the nominal pure-spin case, an external-torque-impulse comparison imposes the same post-impulse condition, [Formula: see text] rad/s and [Formula: see text] rad/s, on the uncorrected and corrected rotors. The uncorrected rotor, for which [Formula: see text] and [Formula: see text] are nonzero, develops pronounced angular-velocity oscillations and a clearly resolved precessional trajectory. After correction, [Formula: see text] and the response is strongly suppressed. The corrected transverse principal moments remain unequal, [Formula: see text], so the residual post-impulse motion is small and bounded rather than identically zero. These results demonstrate the effectiveness and robustness of the mass-property correction within the stated rigid-body model while preserving the distinction between balance-induced precession suppression and the bearing reaction generated by the external impulse itself.

Authors

Publication Details

Journal
International Journal of Structural Stability and Dynamics
Published
2026-11-18
DOI
https://doi.org/10.1142/s0219455428500915
Primary Topic
Dynamics and Control of Mechanical Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Balancing of a Rigid Overhung Rotor by Two-Plane Correction Masses: Exact Solutions and Stability Analysis

Chien-Cheng Chang, Che-Wei Shih, Chia‐Ou Chang, Chun-Peng Hsu et al.
International Journal of Structural Stability and Dynamics
Dynamics and Control of Mechanical Systems
article

Balancing of a Rigid Overhung Rotor by Two-Plane Correction Masses: Exact Solutions and Stability Analysis

Chien-Cheng Chang, Che-Wei Shih, Chia‐Ou Chang, Chun-Peng Hsu, Cheng-Yi Hsu
article en

Abstract

The motivation of this study is to reduce the bearing loads of a short-neck rigid overhung rotor arising from two imbalance-related mechanisms: the centrifugal force caused by an offset center of mass and the precession-induced force caused by misalignment between the rotor shaft and a principal inertia axis. A wafer-cleaning holder press-fitted coaxially onto a motor shaft is considered. Because the connecting neck is very short, its elastic deformation is neglected and the assembly is modeled as a rigid overhung rotor. For a geometrically complex and mass-imbalanced rotor, the off-diagonal inertia-tensor components [Formula: see text], [Formula: see text], and [Formula: see text] may be nonzero, so the prescribed shaft axis need not coincide with a principal inertia axis and torque-free precession can occur. To obtain an exact balancing solution, a theorem-oriented formulation is derived from Euler’s rotational equations. For the prescribed initial condition [Formula: see text] and [Formula: see text], we prove that the necessary and sufficient conditions for the rotor to maintain constant-speed pure spin about its shaft are [Formula: see text] and [Formula: see text]. These conditions make the prescribed shaft axis a principal inertia axis and suppress the rigid-body precession associated with shaft–principal-axis misalignment. The additional conditions [Formula: see text] and [Formula: see text] place the combined center of mass on the shaft axis and eliminate the centrifugal-force component caused by mass imbalance. Two compensating masses are attached on two axially separated correction planes. Their two masses and two angular positions constitute four unknowns, which are determined exactly from the four balancing conditions [Formula: see text]. Numerical integration of the nonlinear Euler equations together with quaternion orientation kinematics is used to reconstruct the shaft-marker trajectory. In addition to the nominal pure-spin case, an external-torque-impulse comparison imposes the same post-impulse condition, [Formula: see text] rad/s and [Formula: see text] rad/s, on the uncorrected and corrected rotors. The uncorrected rotor, for which [Formula: see text] and [Formula: see text] are nonzero, develops pronounced angular-velocity oscillations and a clearly resolved precessional trajectory. After correction, [Formula: see text] and the response is strongly suppressed. The corrected transverse principal moments remain unequal, [Formula: see text], so the residual post-impulse motion is small and bounded rather than identically zero. These results demonstrate the effectiveness and robustness of the mass-property correction within the stated rigid-body model while preserving the distinction between balance-induced precession suppression and the bearing reaction generated by the external impulse itself.

International Journal of Structural Stability and Dynamics
Dynamics and Control of Mechanical Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon