Synthesis and Gas-Sensing Properties of the WS2/g-C3N4 2D Nanocomposites
Abstract― The use of 2D materials in gas sensors makes it possible to create high-speed semiconductor adsorption sensors that do not require heating. The paper considers a 2D nanocomposite based on the WS2 and g-C3N4 materials synthesized by a single-stage calcination method. The surface morphology, phase composition and absorption spectra of the WS2/g-C3N4 nanocomposite were studied. Its gas-sensitive properties were studied when exposed to vapors of isopropanol, ethanol, and acetone at room temperature. It was established that the obtained nanocomposite contains phases of graphite-like carbon nitride and tungsten disulfide. The band gap of the nanocomposite was 2.1 eV. The agglomeration of particles during the application of nanocomposite powder onto a glass substrate was studied. The maximum response of the nanocomposite to 1000 ppm acetone was 5%. The developed WS2/gC3N4-based 2D nanocomposite can be used in gas sensors for operation in explosive environments, as well as in wearable flexible electronic devices.
Authors
- Светлана Сергеевна Налимова (ORCID: https://orcid.org/0000-0003-3065-3961)
- Z. V. Shomakhov
- P. F. Samsygin
- K. D. Bui
Institutions
- Saint Petersburg State Electrotechnical University (RU)
- Kabardino-Balkarian State University (RU)
- Kabardino-Balkarian Scientific Center (RU)
Publication Details
- Journal
- Semiconductors
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1134/s1063782626700041
- Primary Topic
- Gas Sensing Nanomaterials and Sensors
- Type
- article
- Field-Weighted Citation Impact
- 0.00