Wettability-tailored recycled pet nanofibrous membranes for efficient oil/water emulsion separation

In this study, recycled polyethylene terephthalate was electrospun into nanofibrous membranes and surface-modified to develop super-hydrophilic and super-hydrophobic membranes for oil/water emulsion separation. To this end, two chemical modification strategies were employed: a sol–gel method based on tetraethyl orthosilicate to impart super-hydrophilicity, and they used of methyltrichlorosilane to induce super-hydrophobicity. FTIR and EDS analyses provided complementary evidence of silicon- and oxygen-containing species associated with the modified membrane surfaces. FESEM analysis revealed distinct surface morphologies after modification, including silica-associated surface structures in the super-hydrophilic membrane and hierarchical roughness in the super-hydrophobic membrane. Contact angle measurements showed that the pristine PET nanofibers were relatively hydrophobic, with a water contact angle of about 87° ± 1.12; after surface modification, the super-hydrophilic membrane showed a near-zero contact angle, while the super-hydrophobic membrane reached approximately 162° ± 2.8. Additionally, the team measured the underwater oil contact angle for the super-hydrophilic membrane at approximately 165–167°± 3.3, demonstrating its strong oil repellency in aqueous environments. Filtration tests showed that the super-hydrophilic membrane exhibited higher water flux, consistent with its enhanced surface hydrophilicity, whereas the superhydrophobic membrane showed lower water permeability. Mechanical tests further revealed that surface modification improved tensile strength; notably, the super-hydrophobic membrane exhibited a higher Young’s modulus due to the formation of stiffer surface layers. Ultimately, this study demonstrated that targeted surface modification of recycled PET nanofibers can significantly enhance wettability properties, filtration performance, and water/oil separation efficiency, leading to high-value recycled membranes suitable for environmental and industrial applications. Moreover, Both the super-hydrophilic and super-hydrophobic membranes achieved an oil/water separation efficiency of approximately 97 ± 2.4%.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-18
DOI
https://doi.org/10.1038/s41598-026-80354-y
Primary Topic
Surface Modification and Superhydrophobicity
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Wettability-tailored recycled pet nanofibrous membranes for efficient oil/water emulsion separation

Mohsen Moslehi, Behrooz Movahedi, Sara Esmaeili
3 links
Scientific Reports
Surface Modification and Superhydrophobicity
article

Wettability-tailored recycled pet nanofibrous membranes for efficient oil/water emulsion separation

Mohsen Moslehi, Behrooz Movahedi, Sara Esmaeili
article en

Abstract

In this study, recycled polyethylene terephthalate was electrospun into nanofibrous membranes and surface-modified to develop super-hydrophilic and super-hydrophobic membranes for oil/water emulsion separation. To this end, two chemical modification strategies were employed: a sol–gel method based on tetraethyl orthosilicate to impart super-hydrophilicity, and they used of methyltrichlorosilane to induce super-hydrophobicity. FTIR and EDS analyses provided complementary evidence of silicon- and oxygen-containing species associated with the modified membrane surfaces. FESEM analysis revealed distinct surface morphologies after modification, including silica-associated surface structures in the super-hydrophilic membrane and hierarchical roughness in the super-hydrophobic membrane. Contact angle measurements showed that the pristine PET nanofibers were relatively hydrophobic, with a water contact angle of about 87° ± 1.12; after surface modification, the super-hydrophilic membrane showed a near-zero contact angle, while the super-hydrophobic membrane reached approximately 162° ± 2.8. Additionally, the team measured the underwater oil contact angle for the super-hydrophilic membrane at approximately 165–167°± 3.3, demonstrating its strong oil repellency in aqueous environments. Filtration tests showed that the super-hydrophilic membrane exhibited higher water flux, consistent with its enhanced surface hydrophilicity, whereas the superhydrophobic membrane showed lower water permeability. Mechanical tests further revealed that surface modification improved tensile strength; notably, the super-hydrophobic membrane exhibited a higher Young’s modulus due to the formation of stiffer surface layers. Ultimately, this study demonstrated that targeted surface modification of recycled PET nanofibers can significantly enhance wettability properties, filtration performance, and water/oil separation efficiency, leading to high-value recycled membranes suitable for environmental and industrial applications. Moreover, Both the super-hydrophilic and super-hydrophobic membranes achieved an oil/water separation efficiency of approximately 97 ± 2.4%.

Scientific Reports
University of Isfahan (IR)
University of Isfahan
Responsible consumption and production
Surface Modification and Superhydrophobicity
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon