Systematic NIOSH-like evaluation of filtration efficiency and breathing resistance for respirator filter media
Filtration media for air purifying respirators was produced by a scalable electrospinning (ES) process. Morphology control employed during ES enabled fabrication of three fiber configurations of polycaprolactone fibers onto a commercially available polypropylene fabric. Filtration media produced exhibited up to a 1025% increase in 0.3 µm particulate filtration efficiency from the stock polypropylene fabric. A simplistic and affordable method of testing filtration efficiency and breathing resistance was used, and an equation was developed to estimate the minimum surface area required for a given filtration media to meet the minimum differential pressure requirements set forth by the National Institute for Occupational Safety & Health (NIOSH). The methods used for evaluation of filtration efficiency and estimation of minimum surface requirements should be broadly useful for evaluating filtration media and using theory to size filtration media for given applications with required minimum flow rates and maximum pressure loss.Copyright © 2026 American Association for Aerosol Research
Authors
- J. Borkowski
- J. M. Andriolo
- S. Sudhakar
- D. J. Moritz
- J. L. Skinner
- L. J. Suttey (ORCID: https://orcid.org/0000-0003-0573-7645)
Institutions
- Montana State University (US)
- Montana Technological University (US)
Publication Details
- Journal
- Aerosol Science and Technology
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1080/02786826.2026.2747787
- Primary Topic
- Aerosol Filtration and Electrostatic Precipitation
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- U.S. Army Combat Capabilities Development Command Soldier Center
- Army Research Laboratory